The Frontier Sixshooter Community Message Board

Iver Johnson Model 55 .22 - Scribe, 2016-08-23, 08:54
- Not familiar with that exact model... - Hoot, 2016-08-23, 13:15
  - Not familiar with that exact model... - Scribe, 2016-08-23, 13:58
    - Good to hear of your improvements - Hoot, 2016-08-24, 09:48
- Iver Johnson Model 55, I've owned a couple.... - Otony, 2016-08-23, 13:26
  - Iver Johnson Model 55, I've owned a couple.... - Scribe, 2016-08-23, 13:55

Grandson #2 - rob, 2016-08-20, 14:30
- For some reason that pic turned sideways and... - rob, 2016-08-20, 14:42
  - Here we go...Both grandsons:) - rob, 2016-08-20, 16:25
    - Here we go...Both grandsons:) - Cherokee, 2016-08-20, 16:34
      - Thank you... - rob, 2016-08-20, 16:36
        
        reduced and cropped this one a bit for you - Miles, 2016-08-21, 02:21
    - Fine looking boy, there, and... - Caz, 2016-08-20, 18:37
      - That one is my son in law... - rob, 2016-08-20, 18:48
        
        That one is my son in law... - John D, 2016-08-20, 22:26
        
        Ha! Ya beat me to it. Thanks. - Miles, 2016-08-21, 02:22
        
        Thanks John D:-) NM - rob, 2016-08-21, 07:36
    - Here we go...Both grandsons:) - Paul, 2016-08-23, 16:53
      - Here we go...Both grandsons:) - rob, 2016-08-23, 22:05
  - pic turned sideways because it is too big - Miles, 2016-08-21, 02:18
    - That makes sense...thank you NM - rob, 2016-08-21, 07:37
- Grandson #2 - Jared, 2016-08-21, 09:39
- good stuff, right there... - Rob Leahy, 2016-08-21, 10:21
  - Agree - Creeker, 2016-08-22, 06:03
- Congratulations Rob! - Hoot, 2016-08-22, 10:03
  - That's the plan:) - rob, 2016-08-22, 18:30
- Grandson #2 - Sarge, 2016-08-22, 18:26
  - Thanks Sarge:) - rob, 2016-08-22, 18:28
- Thank you all for the kind words... - rob, 2016-08-22, 18:31
- Happiness is a good family....and good hearts... - John Meeker, 2016-08-26, 05:44
  - Thank you John:) nm - rob, 2016-08-26, 07:22
- Congrats Rob! - MS, 2016-08-28, 06:27
  - Congrats Rob! - rob, 2016-08-28, 07:40

It is time. - Paul, 2016-08-20, 12:19
- I have looked at this a few times since posted. - Hoot, 2016-08-22, 10:03
  - Nothing says "HAVOC!" quite like that warface... nt - Paul, 2016-08-22, 10:14
    - I knew it was from Shakespeare but was not familiar with... - Hoot, 2016-08-23, 06:00

If you wanted to eliminate a Springfield 1911 locking.... - rob, 2016-08-20, 10:23
- If you wanted to eliminate a Springfield 1911 locking.... - cas, 2016-08-20, 14:00
  - If you wanted to eliminate a Springfield 1911 locking.... - rob, 2016-08-20, 14:47
- Best to replace the MSH as a complete assembly... - Sarge, 2016-08-20, 14:24
  - Sounds like plan... - rob, 2016-08-20, 14:49
- I have often used Smith and Alexander products. I like - Hobie, 2016-08-20, 21:41

Another I remember the article, but who wrote it. - MR, 2016-08-19, 17:20
- Another I remember the article, but who wrote it. - Drago, 2016-08-20, 00:22
  - Thanks. After more thought it was in the first - MR, 2016-08-20, 09:43
    - You're Welcome! - Drago, 2016-08-20, 12:23
      - 553 lasered yards a 12 x 12 inch rock (est. by mil.) - MR, 2016-08-20, 22:14
        
        Changes since the original post. - MR, 2016-08-20, 22:36
        
        ** should read out past 1000 yards. - MR, 2016-08-20, 22:38
        
        553 lasered yards a 12 x 12 inch rock (est. by mil.) - Drago, 2016-08-20, 23:19

My EDC knife when I can't carry a gun... - stonewalrus, 2016-08-18, 22:18
- My EDC knife when I can't carry a gun... - Frank S, 2016-08-19, 07:11
  - i was wondering the same thing..... - Otony, 2016-08-19, 08:09
  - My work is posted against firearms. They removed the length - stonewalrus, 2016-08-19, 10:29
- I don't know about your laws... - Brian A, 2016-08-19, 08:54
  - Used to be no longer than 4" - that was removed the same - stonewalrus, 2016-08-19, 10:30
- Anti Knife laws are bad laws... when I was a cook, I often - Rob Leahy, 2016-08-19, 09:45
  - with feigned Aussie accent - cr., 2016-08-30, 19:22
- IMO... - Byron, 2016-08-19, 11:13
  - WOW - never thought about dogs being able to smell guns - stonewalrus, 2016-08-19, 13:31
    - Powder residue as well. - Hoot, 2016-08-19, 14:52
      - It is the multi-purpose dogs...... - Ray L, 2016-08-19, 16:32
      - Powder residue as well. - Jared, 2016-08-21, 09:38
- CRKT has the Avenger with a 4" blade already set up IWB - stonewalrus, 2016-08-19, 21:48

Attention Jar-Heads - LAH, 2016-08-18, 11:00
- Nice! - rob, 2016-08-18, 12:13

Training; bring your family to Gunsite Join me there for a 3 - Rob Leahy, 2016-08-18, 10:25
- Training; bring your family to Gunsite Join me there for a 3 - Frank S, 2016-08-18, 20:18
- Revolver-friendly? - Scribe, 2016-08-19, 08:15
  - Revolver-friendly? ABSOLUTELY! We can take a breather, - Rob Leahy, 2016-08-19, 09:40

Hey, Hobie! Re: Faux Military Rifles - Paul, 2016-08-17, 11:49
- DANG it ! - Hobie, 2016-08-17, 19:10
- Hey, Hobie! Re: Faux Military Rifles - Jared, 2016-08-18, 07:48
  - Me, too! (nt) - Paul, 2016-08-18, 09:09
  - We have more of them coming to the shop. One has my - Hobie, 2016-08-18, 19:53
    - Got the Ruger today! - Hobie, 2016-08-19, 19:34
      - Pics or it didn't happen! ;-) (nt) - Paul, 2016-08-20, 07:32
        
        I need to take some photos, that's for certain. I'll try to - Hobie, 2016-08-20, 17:44

I keep playing with the idea of ordering a .256 Win Mag - Hobie, 2016-08-16, 15:25
- I keep playing with the idea of ordering a .256 Win Mag - Remington40x, 2016-08-16, 19:11
  - I keep playing with the idea of ordering a .256 Win Mag - CJM, 2016-08-16, 20:15
    - Brownells does NOT show those bullets in stock. Nobody - Hobie, 2016-08-17, 00:11
      - Sorry - CJM, 2016-08-17, 08:52
      - i was one of the 'snapees'... great bullet and i use - cable, 2016-08-17, 10:47
- I was shooting the octagon barrel with the open sights but - Hobie, 2016-08-17, 00:13
- THERE IS ANOTHER WAY TO DO SO.... - WIL TERRY, 2016-08-17, 09:41
  - that is a very good idea. might have to try that. - cable, 2016-08-17, 10:48
  - What a GREAT idea! - Hobie, 2016-08-17, 19:12

Miss Melodie has pronounced that the 1894 Marlin is, - Hoot, 2016-08-16, 15:24
- Miss Melodie has pronounced that the 1894 Marlin is, - Cherokee, 2016-08-16, 15:59
- I like my rifles to shoot straight, not left and right. - Brien 1, 2016-08-16, 16:19
  - Ya gotta hold yer tongue jest right... - Hoot, 2016-08-16, 19:32
- Miss Melodie has pronounced that the 1894 Marlin is, - Brian A, 2016-08-16, 21:51
- I'm Shocked!! - Slow Hand, 2016-08-17, 04:17
- At least.... - MR, 2016-08-19, 10:35
  - C'mon now! Our relationship has progressed to the point... - Hoot, 2016-08-19, 10:44

Andy Horvath - W.R.D., 2016-08-16, 14:20
- Andy Horvath - Cherokee, 2016-08-16, 15:54
  - Andy Horvath - W.R.D., 2016-08-16, 15:56
    - Andy Horvath - Robb Barnes, 2016-08-17, 16:21
      - COOL!!! - Rob Leahy, 2016-08-17, 22:22

Gonna have to get me an orthopedic handgun - bob, 2016-08-16, 13:46
- 9mm Commander all steel for better recoil mitigation - ERSisk, 2016-08-16, 14:03
- Gonna have to get me an orthopedic handgun - ~JM~, 2016-08-16, 14:03
- Gonna have to get me an orthopedic handgun - Cherokee, 2016-08-16, 15:50
- Gonna have to get me an orthopedic handgun - Slow Hand, 2016-08-16, 16:34
- I am carring an M&P 9mm with 115 +Ps - Rob Leahy, 2016-08-16, 17:45
- What's wrong.... - Glen, 2016-08-16, 21:10
- My Missus... - Sarge, 2016-08-16, 21:12
  - I have the 9C - great fun, feels much better to me than a - stonewalrus, 2016-08-16, 22:13
    - a 9c is my next purchase... Tom, you enabler. Great article, - Rob Leahy, 2016-08-17, 10:20
  - I need to give an M&P another try... - rob, 2016-08-17, 12:39
    - I need to give an M&P another try...yep - Rob Leahy, 2016-08-17, 13:26
      - I need to give an M&P another try...yep - rob, 2016-08-17, 16:14
  - you can experiment with different ammo - bj, 2016-08-17, 19:31
- Well, a .40 is out - bob, 2016-08-17, 20:41
  - Well, a .40 is out - Slow Hand, 2016-08-17, 21:03
  - Well, a .40 is out - Slow Hand, 2016-08-18, 08:20
  - In that case... - Paul, 2016-08-18, 17:17
- Gonna have to get me an orthopedic handgun - LAH, 2016-08-18, 11:12

What's the Going Rate on an S&W Custom Shop 945 .45 ACP? - Remington40x, 2016-08-15, 13:34
- Depends on exactly which configuration - cubrock, 2016-08-15, 21:26
  - Depends on exactly which configuration - Remington40x, 2016-08-16, 19:08
    - $1400-$1500 based on what I have seen - cubrock, 2016-08-16, 19:16
      - $1400-$1500 based on what I have seen - Remington40x, 2016-08-17, 21:16

Against all enemies, foreign and domestic... - Byron, 2016-08-15, 08:40
- Prayers for her... that GI on her right is unsat... - Rob Leahy, 2016-08-15, 09:10
  - Been awhile since he... - Byron, 2016-08-15, 09:56
    - Is that Gary Coleman? - cas, 2016-08-15, 11:25
    - True Story.. - Rob Leahy, 2016-08-15, 11:58
- Medics - bob, 2016-08-15, 14:00
- Bless her heart she is wearing converses! Way to go! Ntxt - Bob Hatfield, 2016-08-15, 17:38
- Prayers and thanks sent... NM - Brian A, 2016-08-15, 20:16

Wilson or Gunsite lowered 1911 thumb safety? - rob, 2016-08-14, 21:25
- Wilson or Gunsite lowered 1911 thumb safety? - Cherokee, 2016-08-14, 21:48

Offhand shooting and the M1-22 Kingston Armory Rifle - Hobie, 2016-08-14, 17:29
- Offhand shooting and the M1-22 Kingston Armory Rifle - Cherokee, 2016-08-14, 18:47
  - It is a steel receiver 10-22 albeit made by Kingston Armory - Hobie, 2016-08-15, 06:05
- the real M1 is a great rifle for standing - bj, 2016-08-14, 19:39
  - Little 8-round clips.... that WOULD be cute. Just uses - Hobie, 2016-08-15, 06:04
    - Any idea of what the price will be??? - TomC, 2016-08-15, 12:22
      - IIRC wholesale is around $650 so I'm thinking street price - Hobie, 2016-08-15, 19:54
- Now Ruger is making an M1 carbine kinda lookalike... - Hobie, 2016-08-15, 19:56

“against all enemies, foreign and domestic.” - Big Six, 2016-08-14, 08:56
- “against all enemies, foreign and domestic.” - Cherokee, 2016-08-14, 14:00
  - “against all enemies, foreign and domestic.” - Frank S, 2016-08-14, 14:35
    - “against all enemies, foreign and domestic.” - Paul, 2016-08-14, 16:13

.454 Rossi 92? - woody, 2016-08-14, 07:32
- The ones I've handled were nice... - Bryan, 2016-08-14, 08:01
  - The ones I've handled were nice... - uncowboy, 2016-08-14, 09:18
    - Exactly. Can't believe they are so hard to find. NT - Bryan, 2016-08-15, 20:41
      - I'll give you a head's up... - Hoot, 2016-08-16, 11:37
- .454 Rossi 92? - Cherokee, 2016-08-14, 18:49
- Shot mine a good bit until it started getting pretty loose. - John K., 2016-08-14, 19:38

FS: set of pewter 1911 grips - USMC - matt/pa, 2016-08-13, 16:57
- Sold, thanks - matt/pa, 2016-08-13, 19:51

Going to be a busy week - ERSisk, 2016-08-13, 10:48
- Been praying for you folks all day. - Hobie, 2016-08-13, 19:42
- What a mess. Glad you are safe. NT - Bryan, 2016-08-13, 22:52
- Update - ERSisk, 2016-08-14, 11:12
- Hope all goes well Ellis. - Hoot, 2016-08-16, 11:38

in the " you cant make it up" category: - cable, 2016-08-11, 19:05
- In this anything goes society - Frank S, 2016-08-12, 06:10
  - In this anything goes society - Ken ONeill, 2016-08-12, 06:27
- in the " you cant make it up" category: - Big Six, 2016-08-12, 07:52
- in the " you cant make it up" category: - Cherokee, 2016-08-12, 15:49
  - me too - cable, 2016-08-12, 16:05
  - me too - and probably not very quietly... - stonewalrus, 2016-08-12, 20:24
- in the " you cant make it up" category: - bob, 2016-08-12, 19:33

Charles...Care to Comment? - Drago, 2016-08-11, 12:59
- Charles...Care to Comment? - Big Six, 2016-08-11, 23:00
- shure - Charles, 2016-08-12, 15:03
  - Amen, Charles - Catoosa, 2016-08-13, 09:46
  - Hang in there Charles.. - Sarge, 2016-08-13, 14:27

Speaking of 'undergunned'.... - Hoot, 2016-08-11, 11:28
- on the other end of the spectrum - I was in a gun shop - stonewalrus, 2016-08-11, 16:59
- Now THAT is a mousegun! - mcassill, 2016-08-11, 18:11
- i bet - Jared, 2016-08-19, 08:30
  - That it does. - Hoot, 2016-08-19, 09:28

FS 45 ACP bullets - Cherokee, 2016-08-10, 18:18
- FS 45 ACP bullets - MS, 2016-08-11, 20:32
  - Received & replied - Cherokee, 2016-08-12, 15:11

While we're talking inappropriate calibers... .177 pig gun - Paul, 2016-08-10, 14:02
- Nice shot placement. NT - Bryan, 2016-08-10, 15:25
- While we're talking inappropriate calibers... .177 pig gun - John Meeker, 2016-08-10, 16:04
  - While we're talking inappropriate calibers... .177 pig gun - uncowboy, 2016-08-10, 16:49
    - Start with air rifle and finish with a machete. Huh. NT - Bryan, 2016-08-10, 19:29

9mm for bear defense? Buffalo Bore ammo... - Rob Leahy, 2016-08-10, 10:31
- That boy should buy a lottery ticket... - Sarge, 2016-08-10, 12:49
  - Ole Phil Shoemaker knows his way aroun d a big bear - Rob Leahy, 2016-08-10, 15:05
    - Ole Phil Shoemaker knows his way aroun d a big bear - Sarge, 2016-08-10, 15:14
      - another brown bear was shot with Winchester 115 fmjs - Rob Leahy, 2016-08-10, 15:36
        
        another brown bear was shot with Winchester 115 fmjs - Sarge, 2016-08-11, 10:46
        
        another brown bear was shot with Winchester 115 fmjs - Big Six, 2016-08-11, 11:17
        
        yes, WE DO!!! CSA is a blast. bring the family. We will - Rob Leahy, 2016-08-11, 15:19
        
        We would very much enjoy meeting with Sarge and Peggy. - Hoot, 2016-08-12, 20:21
        
        We would very much enjoy meeting with Sarge and Peggy. - Sarge, 2016-08-12, 21:24
      - That Nine he was shooting certainly had some zip..... - John Meeker, 2016-08-10, 15:56
        
        Looks like a DAO S&W 3946 ... John I don't think you would - Rob Leahy, 2016-08-10, 17:22
        
        Thankyou, shopping trip on the docket...... - John Meeker, 2016-08-11, 07:40
    - That was my assumption. - Hoot, 2016-08-10, 15:51

Chip, chip, chipping away - cr., 2016-08-10, 09:44
- Chip, chip, chipping away - Cherokee, 2016-08-10, 15:28

Does anyone here have a strong preference on a telescopic... - Hobie, 2016-08-09, 17:34
- Does anyone here have a strong preference on a telescopic... - uncowboy, 2016-08-10, 10:08
  - the BSA is good, and Barska makes one well - cable, 2016-08-10, 16:41

I caved in to temptation. - Hoot, 2016-08-08, 15:26
- Nice. Just dump the hammer spur. NT - Bryan, 2016-08-08, 16:33
  - Hey, at least I pulled the scope mount! - Hoot, 2016-08-09, 07:51
    - Nice. I'm razzing ya. NT - Bryan, 2016-08-09, 09:57
      - Yeah, figured. - Hoot, 2016-08-09, 11:28
  - She be gone Boss. ;-) - Hoot, 2016-08-10, 15:46
    - Don't want to shoot your eye out kid - NT - Bryan, 2016-08-10, 19:32
- I can certainly see why! - MS, 2016-08-08, 18:21
- I caved in to temptation. - Jared, 2016-08-08, 18:48
- Purty! - stonewalrus, 2016-08-08, 18:54
- That looks very sweet! - Brian A, 2016-08-08, 19:41
- I can see how that could happen - Murphy, 2016-08-08, 20:14
- Everything it needs, to be a rifle..a very handsome rifle - John Meeker, 2016-08-08, 20:16
- I caved in to temptation. - Cherokee, 2016-08-08, 21:55
- Thanks fellas! - Hoot, 2016-08-09, 07:55
- Good for you, I should not have passed on those I had - Hobie, 2016-08-09, 18:55
- I caved in to temptation. - mcassill, 2016-08-10, 07:16
- Well done - cubrock, 2016-08-23, 17:32