The Frontier Sixshooter Community Message Board

Making .351 WSL brass - MS Hitman, 2017-05-29, 15:34
- 351 brass - Fivegunner, 2017-05-29, 20:28

A heartfelt "Thank You!!" to all who served. - Hoot, 2017-05-29, 07:36
- A heartfelt "Thank You!!" to all who served. - Cherokee, 2017-05-29, 07:51
- Amen to that... Thanks for your service!!!! - JD, 2017-05-29, 16:06
- Yes, yes, yes! We owe you a great debt. Thank you all. NT - Bryan, 2017-05-29, 17:09
- My project, year 'round, to honor those who have given so - Hobie, 2017-05-30, 18:32

Known the man for 60 years and never knew. - Hoot, 2017-05-28, 11:55
- Known the man for 60 years and never knew. - Cherokee, 2017-05-28, 13:47
- Known the man for 60 years and never knew. - Slow Hand, 2017-05-28, 20:42
- Known the man for 60 years and never knew. - Drago, 2017-05-31, 03:43
  - I like that story. - Hoot, 2017-05-31, 08:00

A friend wants a laser on his AR.... - Otony, 2017-05-27, 23:12
- A friend wants a laser on his AR.... - ERSisk, 2017-05-28, 01:10
- Research here... - Bruce in WV, 2017-05-28, 06:09
- A couple options... - Slow Hand, 2017-05-28, 08:43
  - A couple options... - rob, 2017-05-28, 10:04
    - A couple options... - Slow Hand, 2017-05-28, 11:40
      - Pictures... - rob, 2017-05-28, 19:20
        
        Pictures... - rob, 2017-05-28, 19:22
        
        Found both.... - Otony, 2017-05-28, 19:48
        
        I believe Streamlight makes... - rob, 2017-05-28, 19:53

Gregg Allman passed away - Jhenry, 2017-05-27, 15:55
- Heard that a few minutes ago..........nt - Creeker, 2017-05-27, 18:16

Salute! - stonewalrus, 2017-05-27, 12:23
- Yes Sir.................nt - Creeker, 2017-05-27, 18:17
- Salute! - Cherokee, 2017-05-27, 22:00
- I assume this is your son Tom. - Hoot, 2017-05-28, 08:41
  - Yes, that is my youngest. He turns 10 next month - stonewalrus, 2017-05-28, 09:02
    - Good on him. - Hoot, 2017-05-28, 11:42

Coalition to Stop Gun Violence poll - Miles, 2017-05-26, 21:19
- Coalition to Stop Gun Violence poll - rob, 2017-05-26, 23:39
  - Coalition to Stop Gun Violence poll - Frank S, 2017-05-27, 05:11
- I took the poll and - Fivegunner, 2017-05-27, 07:07
  - +1! - Hoot, 2017-05-27, 07:51
- Coalition to Stop Gun Violence poll - bob, 2017-05-28, 09:33
- poll answered - Amerileiro, 2017-05-30, 13:43

Being patient has its benefits! - Otony, 2017-05-26, 20:28
- You did good............nt - Creeker, 2017-05-26, 20:37
- You will - Robb Barnes, 2017-05-26, 22:53
- You could set it up like this. - Andrew, 2017-05-26, 23:55
  - You could set it up like this. - Fivegunner, 2017-05-27, 07:10

Attention Texas - Creeker, 2017-05-26, 18:02
- Attention Texas - rob, 2017-05-26, 18:31
  - Attention Texas - Creeker, 2017-05-27, 07:39
    - Attention Texas - rob, 2017-05-27, 10:37

Be vigilant - stonewalrus, 2017-05-25, 16:20
- Yes Sir; Thanks for the heads up. - Fivegunner, 2017-05-25, 16:45
  - combination with Memorial Day weekend concerns me - stonewalrus, 2017-05-25, 17:59
- And carry a rifle! NM - rob, 2017-05-25, 17:20
  - And carry a rifle! NM - Slow Hand, 2017-05-26, 18:10
- Thank you Sir...........nt - Creeker, 2017-05-26, 18:06

Vortex Optics... - rob, 2017-05-25, 14:26
- Vortex Optics... - Slow Hand, 2017-05-26, 18:01
  - Vortex Optics... - rob, 2017-05-26, 18:15
    - Vortex Optics... - Creeker, 2017-05-26, 19:07
      - Vortex Optics... - rob, 2017-05-26, 20:50
        
        Vortex Optics... - Creeker, 2017-05-30, 12:15
    - Vortex Optics... - Slow Hand, 2017-05-26, 19:22

Winchester experts help please - uncowboy, 2017-05-25, 09:54
- is it not the same as any other 94? - bj, 2017-05-25, 23:56
  - is it not the same as any other 94? - uncowboy, 2017-05-26, 08:38
- uncowboy send me your email add - Brien1, 2017-05-26, 10:03
- Does this help? - Bri A, 2017-05-27, 03:39
- Winchester experts help please - anachronism, 2017-05-27, 07:24

Anyone know anything about P&C Molds? - Hoot, 2017-05-23, 11:14
- Correction: American Handgunner 1984 - Hoot, 2017-05-25, 07:29
  - You might try contacting Penn Bullets - Cherokee, 2017-05-25, 08:25
    - Thanks for the thought. - Hoot, 2017-05-26, 14:07

Sixgun goodness - Catoosa, 2017-05-23, 09:35
- A fella just has to love old Smiths. - Hoot, 2017-05-23, 11:19
- Sounds like a good'n... - Bri A, 2017-05-23, 21:54

223 Handloads for AR: Varget or H335? - rob, 2017-05-22, 11:29
- Here's a non-answer for you. - Hoot, 2017-05-22, 12:31
  - I like your 223... - rob, 2017-05-22, 14:00
    - Thank you. - Hoot, 2017-05-23, 06:56
- 50.2 grains may require slight compression <NM> - RidinLou, 2017-05-22, 15:50
  - Lol...slightly:) - rob, 2017-05-22, 18:38
- Varget is a favorite for competition - bj, 2017-05-22, 20:09
  - Varget is a favorite for competition - rob, 2017-05-22, 21:17
- 223 Handloads for AR: Varget or H335? - Cherokee, 2017-05-23, 07:31
  - Excellent... - rob, 2017-05-23, 07:44

Huh...this deserves a caption... - Bryan, 2017-05-22, 11:09
- "Ees no my yob, mon." - Hoot, 2017-05-22, 12:19
- Huh...this deserves a caption... - Catoosa, 2017-05-23, 09:41
- Mama always told me.... - Mike P, 2017-05-23, 12:58
- "Now Rory dear, listen to your mother…" - pokynojoe, 2017-05-23, 19:47

Paging Cherokee - Byron, 2017-05-21, 12:08
- Paging Cherokee - Cherokee, 2017-05-22, 10:21

Ruger American Compact - Dave B, 2017-05-19, 22:59
- Great gun! - matt/pa, 2017-05-20, 10:56
  - Not Disappointed! - Dave B, 2017-05-21, 09:03

Bro' Dan has gone and bought a 476 GNR. - Hoot, 2017-05-19, 06:59
- inbound email...... - Gunner, 2017-05-19, 20:06
  - Got it. - Hoot, 2017-05-20, 08:03
- Bro' Dan has gone and bought a 476 GNR. - Jared, 2017-05-20, 08:58
  - Thanks Jared. - Hoot, 2017-05-20, 09:11
    - Thanks Jared. - Jared, 2017-05-21, 07:41

Finally! Finally found a missing J-frame! - Otony, 2017-05-18, 21:30
- I Remember... - ~JM~, 2017-05-18, 22:11
- Glad you found it. - Hoot, 2017-05-19, 05:29
- Finally! Finally found a missing J-frame! - uncowboy, 2017-05-19, 09:27
- I'm still looking - Catoosa, 2017-05-19, 09:30
- It happens... - Bri A, 2017-05-20, 14:10

USMC and SOCOM seeking lightweight Ma Deuce replacement - mcassill, 2017-05-18, 09:58
- You had me at: - Hoot, 2017-05-18, 10:22
  - I have to agree..... - Otony, 2017-05-18, 21:16
    - links preclude the use of a belted case nm. - ERSisk, 2017-05-18, 21:38
      - Okay, nix the belt, but you have to admit.... - Otony, 2017-05-18, 22:34
      - what's the problem with the belt? - bj, 2017-05-18, 23:45
        
        .338 Lapua isn't belted :). NM - mcassill, 2017-05-19, 04:48
        
        And getting belted cases to de-link would prove problematic. - cas, 2017-05-19, 16:37
        
        Im not following the problem with metal links either. - John K., 2017-05-19, 19:54
        
        same - Jared, 2017-05-20, 08:50
        
        Russians use 7.62x54R with metal links just fine - mcassill, 2017-05-20, 11:48
  - I'm thinking more a 3 barrel .35 Magnum minigun. nm - ERSisk, 2017-05-18, 22:18
    - You able to build that light enough... - mcassill, 2017-05-19, 13:26
      - Long extention cord. - cas, 2017-05-19, 16:38
      - There upper limit was 25 pounds. I'm assuming weapon wt. - ERSisk, 2017-05-19, 19:59
        
        Problem is recoil - CJM, 2017-05-22, 01:19
  - As it turns out, General Dynamics has already built one - mcassill, 2017-05-20, 11:49
- Anyone whohas stood behind one knows there is no replacement - ERSisk, 2017-05-18, 21:33
  - Anyone whohas stood behind one knows there is no replacement - bob, 2017-05-18, 22:12
  - The one big problem with the M2: - mcassill, 2017-05-19, 04:47

scope mount windage off - bj, 2017-05-17, 23:07
- 50 MOA?!!? Holy cow! - Hoot, 2017-05-18, 06:50
- scope mount windage off - Jimmy P., 2017-05-18, 07:00
  - That's probably what it is. Nm - mcassill, 2017-05-18, 13:45
  - maybe not the holes - bj, 2017-05-18, 20:04
    - I think the ring system Jimmy P is talking about... - rob, 2017-05-19, 07:32
      - Link.... - rob, 2017-05-19, 07:37
- My Guide Gun has the same issue... - rob, 2017-05-18, 08:16
  - My Guide Gun has the same issue... - Jared, 2017-05-18, 09:17
- What kind of mount? - cas, 2017-05-19, 16:40

Ramblings of bullet effectiveness... - Bri A, 2017-05-17, 20:27
- need the proverbial "Mack truck" - bj, 2017-05-17, 21:43
  - I think that's very true. Nm - rob, 2017-05-17, 21:57
  - need the proverbial "Mack truck" - Bri A, 2017-05-17, 23:14
- I've had very good luck with 300 grain JHP's in my Guide Gun - rob, 2017-05-17, 21:55
  - Maybe it is the load I used... - Bri A, 2017-05-17, 23:11
    - Maybe it is the load I used... - rob, 2017-05-18, 07:53
    - Maybe it is the load I used... - Jared, 2017-05-18, 08:48
- It's a puzzlement, ain't it? - Hoot, 2017-05-18, 07:27
  - I get the impression... - rob, 2017-05-18, 08:04
  - It's a puzzlement, ain't it? - Jared, 2017-05-18, 08:55
    - I like the sound of those results. - Hoot, 2017-05-19, 05:36
  - It certainly is... - Bri A, 2017-05-18, 23:39
    - My deer experiences have been very similar. - Hoot, 2017-05-19, 05:34
  - Have always enjoyed the 35's... - Bri A, 2017-05-21, 08:40
- Penetration is paramount. - Jared, 2017-05-18, 08:45
  - Penetration is paramount. - rob, 2017-05-18, 14:43
    - Oh c'mon, "everybody" knows... - Hoot, 2017-05-18, 19:13
      - no .357 Herrett? - bj, 2017-05-18, 20:01
        
        Unfortunately, no. - Hoot, 2017-05-19, 05:33
      - Oh c'mon, "everybody" knows... - rob, 2017-05-19, 07:24
        
        I have a couple Whelens. - Hoot, 2017-05-19, 12:09
        
        I have a couple Whelens. - rob, 2017-05-19, 17:44
- At the risk of being flamed. location, location , location. - ERSisk, 2017-05-18, 21:51
  - No flames... - Bri A, 2017-05-20, 15:06
- Bullet effectiveness... - Byron, 2017-05-20, 12:31
  - Oh man... - Bri A, 2017-05-20, 14:58
  - Bullet effectiveness... - rob, 2017-05-25, 22:38
- Bullet effectiveness... - Gunner, 2017-05-20, 13:09
  - Exactly my point... - Bri A, 2017-05-20, 14:47
    - Thanks for that story. - Hoot, 2017-05-22, 09:11
    - It is a true story... - Bri A, 2017-05-23, 13:57
    - Lol...Numbers 32:23:) nm - rob, 2017-05-25, 17:30
  - Bullet effectiveness... - Jared, 2017-05-20, 21:26

Greener question Bryan - Hoot, 2017-05-17, 10:12
- About 23". NT - Bryan, 2017-05-17, 13:04

Shooting the New Gen 4 Glock 19 TALO - Scribe, 2017-05-16, 07:10
- Shooting the New Gen 4 Glock 19 TALO - rob, 2017-05-16, 18:03
  - Ameriglo sights - Scribe, 2017-05-17, 09:37
    - Glock Triggers.... - rob, 2017-05-17, 21:00
      - Glock Triggers.... - Scribe, 2017-05-18, 07:01
        
        But I bet you have fun:) NM - rob, 2017-05-18, 14:45

What's on your wish list these days? - Bryan, 2017-05-15, 14:09
- What's on your wish list these days? - uncowboy, 2017-05-15, 14:31
  - I hear that... - Bryan, 2017-05-15, 14:49
- A Springfield 1922 M2 would be neat!!!! - JD, 2017-05-15, 14:53
  - I bet Chris has one. I know he has several M/S. NT - Bryan, 2017-05-15, 14:59
  - Actually, not a single gun since - Robb Barnes, 2017-05-15, 15:01
    - That's exciting Robb... - Bryan, 2017-05-15, 15:05
    - Also, it would be nice to talk again sometime. NT - Bryan, 2017-05-15, 15:06
  - A Springfield 1922 M2 would be neat!!!! - Remington40x, 2017-05-16, 16:16
    - Interesting...any photos? NT - Bryan, 2017-05-16, 16:24
      - Interesting...any photos? NT - Remington40x, 2017-05-17, 07:54
        
        bryan (at) stratos2.com - Bryan, 2017-05-17, 08:46
        
        bryan (at) stratos2.com - Remington40x, 2017-05-17, 09:00
        
        Nice. Photo below... - Bryan, 2017-05-17, 11:40
        
        Nice. Photo below... - Remington40x, 2017-05-17, 13:26
        
        bryan (at) stratos2.com - Remington40x, 2017-05-17, 11:30
- Who knows? - Hoot, 2017-05-15, 15:35
  - That is well put Hoot... - Bryan, 2017-05-15, 16:08
    - "They interest me far more than the new guns." - Hoot, 2017-05-15, 19:46
  - If gun projects are inversely proportional to sanity, - John K., 2017-05-15, 19:12
    - HAHAHAHAHA!! - Hoot, 2017-05-15, 19:41
    - That describes my life! - Bri A, 2017-05-15, 21:58
    - Projects. - Jared, 2017-05-18, 11:22
      - Projects. - bj, 2017-05-18, 20:07
        
        Same here - Jared, 2017-05-18, 22:14
        
        Projects. - rob, 2017-05-19, 07:39
- definitely a "wish list" - bj, 2017-05-15, 19:48
- What's on your wish list these days? - Frank S, 2017-05-15, 19:57
- I would like to be healthy enough to do what I want to do... - Hobie, 2017-05-15, 20:27
  - I hear you ! Me too. - Cherokee, 2017-05-15, 21:26
- 1 NFA paperwork that doesn't take 10 months. - Miles, 2017-05-16, 22:21
  - Yes and yes! Both would be most welcome. NT - Bryan, 2017-05-16, 22:54
- What's on your wish list these days? - Paul, 2017-05-17, 07:09
  - Let me know if those become available to you... - Bryan, 2017-05-17, 08:47
    - Let me know if those become available to you... - rob, 2017-05-18, 18:47
- Triple Lock Target... - Boge Quinn, 2017-05-19, 15:42
  - Blessed indeed and that's a couple of nice items... - Bryan, 2017-05-19, 15:52

Ruger Single 10 report - ERSisk, 2017-05-13, 23:30
- I had an Accusport Bisley... - rob, 2017-05-14, 08:41
- Ruger Single 10 report - Catoosa, 2017-05-15, 09:42
  - Going to check with Ruger and see what they say. - ERSisk, 2017-05-16, 22:20
    - Going to check with Ruger and see what they say. - Catoosa, 2017-05-17, 09:27
      - Front is off center turning barrel will center both f & r - ERSisk, 2017-05-17, 20:27
        
        Front is off center turning barrel will center both f & r - Catoosa, 2017-05-17, 22:45
- Ruger Single 10 report: What happened? - Mike P, 2018-03-21, 13:07

Just because - Dave B, 2017-05-13, 09:04

Here's the young man we've been praying for... - Paul, 2017-05-13, 09:00
- Prayers - Dave B, 2017-05-13, 09:02
- Second pic, from happier times... - Paul, 2017-05-13, 09:05
- Prayers sent... - rob, 2017-05-13, 09:22
  - Prayers sent... - Paul, 2017-05-13, 09:29
    - Gotta take good care of your mechanic:-) nm - rob, 2017-05-13, 09:30
  - Prayers sent... - rob, 2017-05-13, 09:29
- Here's the young man we've been praying for... - Cherokee, 2017-05-13, 21:57

Model 10's and Plus P - Ken O'Neill, 2017-05-13, 08:53
- Model 10's and Plus P -ALL OF 'EM AFTER - WIL TERRY, 2017-05-13, 08:59
  - Model 10's and Plus P -ALL OF 'EM AFTER - Ken O'Neill, 2017-05-13, 09:33