The Frontier Sixshooter Community Message Board

US consulate in Libya - stonewalrus, 2012-10-11, 18:26

RIP CSM Basil Plumley - Warhawk, 2012-10-11, 15:16
- A Sad Day Indeed - Jhenry, 2012-10-11, 16:24
- RIP CSM Basil Plumley - r/b, 2012-10-12, 06:28
- Just this badge alone ... - Warhawk, 2012-10-15, 21:55
  - Just this badge alone ... - Wildcat, 2012-10-16, 18:11
    - Just this badge alone ... - Warhawk, 2012-10-17, 22:09

Preaching to the choir... - Byron, 2012-10-11, 13:40
- Preaching to the choir... - Warhawk, 2012-10-11, 15:11
- Preaching to the choir... - wpage, 2012-10-11, 16:26
- Preaching to the choir... - Jhenry, 2012-10-11, 16:31
  - Amen - LAH, 2012-10-17, 16:25

JB and heat - Catoosa, 2012-10-11, 09:38
- I've seen this happen before on a mini - the entire assembly - John K., 2012-10-11, 11:06
  - lose the glue - mike c, 2012-10-12, 16:07
- JB and heat - Alfred John, 2012-10-11, 12:10
- I know of someone ..ahem.. who used JB weld and a nickel - stonewalrus, 2012-10-11, 12:24
- I'd try Loctite 620 High Temp Bearing Mount - JD, 2012-10-11, 14:40
  - and jb weld has ahigh heat version also: - cable, 2012-10-11, 16:37
- JB and heat - John Meeker, 2012-10-11, 20:16
  - I used Loctite 680 - Mark Stevenson, 2012-10-11, 23:35
- Thanks, Y'all! - Catoosa, 2012-10-12, 16:58

Bullet casters -- found my old box of sizing dies... - John Meeker, 2012-10-11, 09:31
- Bullet casters -- found my old box of sizing dies... - woody, 2012-10-11, 10:00
- Bullet casters -- found my old box of sizing dies... - Dennis, 2012-10-11, 10:09
  - Bullet casters -- found my old box of sizing dies... - John Meeker, 2012-10-13, 12:37
- Bullet casters -- found my old box of sizing dies... - cubrock, 2012-10-11, 14:27
  - Bullet casters -- found my old box of sizing dies... - John Meeker, 2012-10-13, 12:45
- Bullet casters -- found my old box of sizing dies... - Jared, 2012-10-11, 16:48
  - Bullet casters -- found my old box of sizing dies... - uncowboy, 2012-10-13, 03:32
    - Lyman's, sorry. Better luck nex time - John Meeker, 2012-10-13, 12:43
  - sizing dies... - John Meeker, 2012-10-13, 12:40

Had to go to court...... - Otony, 2012-10-10, 18:11
- Now be watchful for vengence - Rob Leahy, 2012-10-10, 18:33
  - Now be watchful for vengence - Otony, 2012-10-10, 18:35
    - Now be watchful for vengence and you may not collect - Cherokee, 2012-10-10, 20:45
      - you may not collect - Otony, 2012-10-10, 21:24
        
        you may not collect - John Meeker, 2012-10-11, 09:29

CSA Reunion - BJ Snow, 2012-10-09, 20:22
- CSA Reunion - Jared, 2012-10-09, 20:42

Happy Birthday Tom Richardson - Murphy, 2012-10-09, 20:13
- Happy Birthday Tom Richardson - Tom Richardson, 2012-10-09, 20:49
- Happy Birthday Tom Richardson... - Rob Leahy, 2012-10-09, 21:41
- Yes! Happy birthday Mr. Tom! - Hoot, 2012-10-09, 21:50
- HAPPY BIRTHDAY TOM! - Catoosa, 2012-10-09, 22:13
- And another Happy Birthday for Tom !! - Cherokee, 2012-10-10, 07:24
- Happy Birthday Tom Richardson - jgt, 2012-10-10, 08:17
- Happy Birthday Tom Richardson - edwardyoung, 2012-10-10, 17:38
- Happy Birthday Tom! - Sarge, 2012-10-10, 21:41

WTB shooter OM 357 4 5/8" - woody, 2012-10-09, 17:47

squirrel season: great gun for sale locally [ not mine ] - cable, 2012-10-09, 10:47
- Harold you need that! Front porch of the cabin gun:-) - Rob Leahy, 2012-10-09, 11:10
  - thought about it. you could use it for javelinas, mount it - cable, 2012-10-09, 11:25
    - Oh, yeah! Jan fell in love with Colt's Bulldog Gatlin Gun - Rob Leahy, 2012-10-09, 11:33
      - Oh, yeah! Jan fell in love with Colt's Bulldog Gatlin Gun - Jhenry, 2012-10-09, 16:20
        
        OWhy whatever do you mean to imply? - Rob Leahy, 2012-10-09, 17:25
        
        Always keep wifey happy - Jhenry, 2012-10-10, 06:39
- That would be great fun to own and shoot !! - Cherokee, 2012-10-09, 15:30
  - YES! great for running jack rabbits! - cable, 2012-10-09, 17:38

An old story about an old Sergeant - Warhawk, 2012-10-09, 00:23
- Its a good story, deserves a read.. - Cherokee, 2012-10-09, 08:12
  - yep I had seen a shorter version of this before. Good read. - Rob Leahy, 2012-10-09, 10:08

Anybody here using Danner Explorer boots? - Otony, 2012-10-08, 20:46
- Anybody here using Danner Explorer boots? - bob, 2012-10-08, 21:01
  - As usual, you are a wealth of wisdom...... - Otony, 2012-10-08, 21:27
    - I used my Danners hard for about 15 years...finally - Rob Leahy, 2012-10-08, 22:25
    - As usual, you are a wealth of wisdom...... - bob, 2012-10-11, 19:21
- Anybody here using Danner Explorer boots? - Jhenry, 2012-10-09, 06:33
- Anybody here using Danner Explorer boots? - woody, 2012-10-09, 06:51
- Just got an e-flyer from Midway. - Hoot, 2012-10-10, 12:10
  - Just got an e-flyer from Midway. - Otony, 2012-10-10, 16:07
- Anybody here using Danner Explorer boots? - In Florida, 2012-12-17, 07:19

Bought me a new revolver. (New to Me) - Tom Richardson, 2012-10-08, 17:42
- Bought me a new revolver. (New to Me) - Slow Hand, 2012-10-08, 18:36
- You done GOOD!!! - stonewalrus, 2012-10-08, 18:59
- Dang!! I jusat hate when youse guys poet REAL guns... - John Meeker, 2012-10-08, 19:14
- Tom, that thing looks dangerous... - Sarge, 2012-10-08, 19:24
- I am considering - Dave B, 2012-10-08, 19:57
  - Do it Dave 100 bucks quick. I really like my 45ACP/Colt MG. - Rob Leahy, 2012-10-08, 22:29
- Great find !! Enjoy it with lots of rounds downrange... - Cherokee, 2012-10-09, 08:08
- Bought me a new revolver. (New to Me) - jgt, 2012-10-09, 09:14
- Chopped Barrel and Extra Cylinder - Charles, 2012-10-09, 09:26
- Bought me a new revolver. (New to Me) - Remington40x, 2012-10-09, 10:16
- Looks like a lot of fun. - Brian A, 2012-10-09, 19:59

Green dot vs red dot scope? - stonewalrus, 2012-10-08, 08:48
- It can be seena litle better but, try and find a quality - Rob Leahy, 2012-10-08, 10:27
- Green dot vs red dot scope? - Slow Hand, 2012-10-08, 18:41
  - Green dot vs red dot scope? - wpage, 2012-10-13, 20:37

Catoosa flight has RTB'd - Catoosa, 2012-10-07, 20:49
- glad to hear you're home safe and had a good time - stonewalrus, 2012-10-07, 22:25
- Off topic - woody, 2012-10-09, 15:08
  - Off topic - Catoosa, 2012-10-09, 22:32

Anyone load 311316 cast in 32 H&R magnum? - woody, 2012-10-07, 19:36
- In 32 H&R magnum... - Glen, 2012-10-07, 21:01
  - In 32 H&R magnum... - Bud, 2012-10-07, 21:04
- Anyone load 311316 cast in 32 H&R magnum? - Jared, 2012-10-08, 09:22
  - Thanks Jared - woody, 2012-10-08, 09:32
    - Thanks Jared - Jared, 2012-10-11, 16:56
- Anyone load 311316 cast in 32 H&R magnum? - Remington40x, 2012-10-10, 15:48

AR thoughts......... - Byron, 2012-10-07, 11:07
- I have come to the same conclussions. I was probably - Rob Leahy, 2012-10-07, 12:48
  - Boss man bought a CUCV a couple of months ago. They - Hobie, 2012-10-07, 13:26
    - As long as you don't want to go more than 45mph uphill. ;) - cas, 2012-10-07, 19:42
      - They are barebones but compared to some of the other - Hobie, 2012-10-07, 21:11
        
        My buddy drove that truck from Michigan to Long island... - cas, 2012-10-07, 21:33
        
        They will do 70MPH, & I plan on doing spray on bed liner - Rob Leahy, 2012-10-07, 22:42
        
        70MPH… down hill maybe. lol - cas, 2012-10-08, 00:56
        
        Be Careful With That Disease... - Brian A, 2012-10-08, 01:44
  - I have come to the same conclussions. I was probably - Warhawk, 2012-10-07, 20:54
  - I learned to drive in a Mil-Surp Jeep - Dave B, 2012-10-08, 19:38
- changed my mind to favor them in 1981 when i went into army - cable, 2012-10-07, 13:04
- Never was a hater myself - haven't been without a selection - John K., 2012-10-07, 15:33
  - Never was a hater myself - haven't been without a selection - Alfred John, 2012-10-07, 15:45
- I had the M14 in the Army. Afterward, I bought a Mini14 - Cherokee, 2012-10-07, 17:16
- I agree- convenient and easy to shoot - bj, 2012-10-07, 19:25
  - I agree- convenient and easy to shoot - Alfred John, 2012-10-08, 10:10
- Still plenty of things about the design I curse. - cas, 2012-10-07, 19:47
- AR thoughts......... - Slow Hand, 2012-10-08, 18:57
- Been hunting with one or two of them myself. - Flatlander, 2012-10-09, 21:57
  - I can vouch for Ethan being pretty good with it! - Rob Leahy, 2012-10-11, 17:23

Driving home yesterday..... - Otony, 2012-10-07, 10:57
- Sounds like a good time for a drive by!!!! - woody, 2012-10-07, 19:27
  - Sounds like a good time for a drive by!!!! - Catoosa, 2012-10-07, 21:19

Don't feed trolls or spammers, please - Paul, 2012-10-07, 00:15

Home, with Dashiell - brionic, 2012-10-06, 12:44
- Great news... - Hobie, 2012-10-06, 12:52
- AWESOME - stonewalrus, 2012-10-06, 12:59
- Great Report, wonderful to hear.. - Cherokee, 2012-10-06, 15:01
- What a cool picture and I am so glad he likes that little - Rob Leahy, 2012-10-06, 15:21
- Sounds like he's rip roarin' to go and chipper as they get. - Murphy, 2012-10-06, 15:27
- Way to go, Dashiell! - AkRay, 2012-10-06, 17:15
- God is Great - Jhenry, 2012-10-06, 17:40
- TERRIFIC!!!!!!!!!!!!!!!!!!!!! - Drago, 2012-10-06, 22:10
- WOW!!! did you ever make my day!!! Thanks to God - cable, 2012-10-07, 13:08
- Great to hear!!! - woody, 2012-10-07, 14:40
  - That's fantastic! - Mark Stevenson, 2012-10-07, 17:11
- That's WONDERFUL Brian!! - Hoot, 2012-10-08, 08:24
  - That's WONDERFUL Brian!! - madbohemian, 2012-10-08, 09:02

Lyman Keith 358439 hollow-points for deer? - AaronB, 2012-10-06, 10:41
- Lyman Keith 358439 hollow-points for deer? - Murphy, 2012-10-06, 15:25
- I would not. - Glen, 2012-10-06, 21:49
- Aaron, I think you will be disappointed with the acccuracy - John K., 2012-10-07, 15:50
  - No hydraulic forces in the railroad tie - Glen, 2012-10-08, 15:24
  - I've got another mold I might try... - AaronB, 2012-10-08, 18:37
    - I've got another mold I might try... - Slow Hand, 2012-10-08, 19:12

my MIC mcPHERSON M39 MOUNTIE HAS ARRIVED! - Rob Leahy, 2012-10-06, 00:35
- my MIC mcPHERSON M39 MOUNTIE HAS ARRIVED! - cubrock, 2012-10-06, 07:59
- my MIC mcPHERSON M39 MOUNTIE HAS ARRIVED! - bob, 2012-10-06, 10:36
- I would love to have a Mountie worked over by him - edwardyoung, 2012-10-06, 11:49
- I have a WELL used Mountie that could use some TLC... - Hobie, 2012-10-06, 14:09
- Sounds pretty neat Rob. Question... - Hoot, 2012-10-08, 08:27
  - Straight stock/lever, 20" bbl - BCodd, 2012-10-08, 11:39
    - Ah, like this then... - Hoot, 2012-10-08, 15:15
      - I'm gonna tell and Miss Melodie's gonna kick yer butt! - Rob Leahy, 2012-10-09, 18:03
        
        Well, you see, what I meant was, err, I meant to say that... - Hoot, 2012-10-09, 21:48

Model 28 Highway Patrolman - stonecoldrc, 2012-10-05, 06:35
- Model 28 Highway Patrolman - cubrock, 2012-10-05, 08:53
  - My Model 28 Highway Patrolman - Rob Leahy, 2012-10-05, 10:01
- Model 28 Highway Patrolman - Warhawk, 2012-10-05, 12:03
- Model 28 Highway Patrolman - stonecoldrc, 2012-10-05, 14:19
  - Model 28 Highway Patrolman - Charles, 2012-10-08, 13:48
- I stole mine from Tom Richardson at Shootist Holiday '12... - Boge Quinn, 2012-10-05, 19:22
  - I stole mine from Tom Richardson at Shootist Holiday '12... - Tom Richardson, 2012-10-06, 05:29
    - So it worked out for everybody... - Boge Quinn, 2012-10-06, 09:58

Good deal on a DPMS complete LWt Wght Upper - Rob Leahy, 2012-10-04, 12:01
- That is a good deal with bolt and carrier. - Cherokee, 2012-10-04, 22:01
- No big deal..... - Byron, 2012-10-04, 22:13
  - nothing wrong with a .357 lever dispenser, however -- - John Meeker, 2012-10-04, 23:03
    - It was a joke........... - Byron, 2012-10-05, 08:31
      - I think it is funny that I am recomending ARS while you - Rob Leahy, 2012-10-05, 09:47
      - Gloomy Gus, Me - John Meeker, 2012-10-07, 07:31

FS - sone SA Parts - sack peterson, 2012-10-04, 10:35

Best place to get gas checks? - woody, 2012-10-04, 04:59
- What are you shooting the bullet in ? For pistols, I have - Cherokee, 2012-10-04, 07:35
- Best place to get gas checks? - Dennis, 2012-10-04, 07:55
  - Best place to get gas checks? - Bud, 2012-10-04, 08:09
    - Best place to get gas checks? - woody, 2012-10-04, 08:50
      - Best place to get gas checks? - Alfred John, 2012-10-04, 11:26

Alabammy bound - Catoosa, 2012-10-03, 22:20
- Alabammy bound - Tom Richardson, 2012-10-04, 06:21
  - Alabammy bound - Murphy, 2012-10-04, 12:38
    - Alabammy bound - Catoosa, 2012-10-07, 20:45

EBR project - ESisk, 2012-10-03, 21:28
- EBR projects AR 1-15 parts sources I have used/recomend - Rob Leahy, 2012-10-03, 22:01
  - Thanks Rob I will check all those sights out this weekend - ESisk, 2012-10-04, 23:10
    - Some other sources - Warhawk, 2012-10-05, 14:33
      - Some other sources - Warhawk, 2012-10-06, 20:13

Question about Ruger Air Hawk Barrel Cocker - ESisk, 2012-10-03, 21:05
- .177 - ESisk, 2012-10-03, 21:07
  - .177 - try heavier pellets - Paul, 2012-10-04, 21:00
- Question about Ruger Air Hawk Barrel Cocker - Hobie, 2012-10-03, 21:15
- If it is brand new it may need broken in - stonewalrus, 2012-10-03, 21:15
  - Yes, the mechanisms work better/more consistently - Hobie, 2012-10-03, 21:18
    - About 35 pellets left in can of250. Was thinking - ESisk, 2012-10-03, 21:43
      - Agree with Stonewalrus.... - Bud, 2012-10-04, 09:11
        
        I bought a side cocker after reading up - stonewalrus, 2012-10-05, 07:23

Anyone need SP101 springs? - woody, 2012-10-03, 19:22
- If no one else wants 'em, I could use 'em. - Boge Quinn, 2012-10-03, 21:03
  - All yours - woody, 2012-10-04, 04:54
    - Thankee, sir! - Boge Quinn, 2012-10-04, 08:32