The Frontier Sixshooter Community Message Board

FS - useful single adction parts - sack peterson, 2013-01-06, 10:33

For Sale: Bowen S&W '1917/50' .45 ACP - FOG, 2013-01-05, 14:11
- For Sale: Bowen S&W '1917/50' .45 ACP - Gary G, 2013-01-06, 09:50
  - Will take AW 500 holster,,,Email in route - Gary G, 2013-01-06, 12:21
    - E-mail not in route,,,,Click on post for my e-mail - Gary G, 2013-01-06, 12:24
      - 200 AW is *SOLD* - FOG, 2013-01-06, 13:41
      - SYSTEM: "Mail delivery failed" - FOG, 2013-01-06, 13:59
        
        My Bust,,,,,,correction - Gary G, 2013-01-06, 23:56
        
        No worries... - FOG, 2013-01-07, 09:03
        
        Replied and Thank You also. - Gary G, 2013-01-07, 19:09
- Shook out all the couch cushions... - Hoot, 2013-01-06, 10:40
  - Did you check the...(lol) - FOG, 2013-01-06, 13:46
- Nice pictures Dave! - Glen, 2013-01-09, 19:38
  - Thanks, Glen! - FOG, 2013-01-09, 20:33
    - Thank you Dave! - Glen, 2013-01-10, 17:06
      - To be sure you get the most out of it... - FOG, 2013-01-11, 01:11
- RE: Bowen S&W '1917/50', etc. - FOG, 2013-01-10, 00:45

Ruger OMSBH Question - FOG, 2013-01-05, 11:21
- Cylinder should rotate freely - Bj2, 2013-01-05, 11:40
  - RE: Cylinder should rotate freely - FOG, 2013-01-05, 13:15
    - Belt Mountain pins are - Paul, 2013-01-05, 15:35
      - OEM pin is - FOG, 2013-01-05, 16:04
        
        It's necessary to remove . . . - Kentucky, 2013-01-05, 16:21
        
        It's necessary to remove . . . - Dennis Eugene, 2013-01-05, 17:12
        
        re: KY's advice - FOG, 2013-01-05, 17:30
    - RE: Cylinder should rotate freely - bj, 2013-01-05, 19:43
      - RE: Cylinder should rotate freely - Paul, 2013-01-05, 20:55
        
        RE: Cylinder should rotate freely - bj, 2013-01-05, 21:10
      - RE: Cylinder should rotate freely - FOG, 2013-01-06, 09:43

Is Obama going to get what he wants? - Dave B, 2013-01-04, 21:40
- Is Obama going to get what he wants? - Lloyd Smale, 2013-01-05, 05:39
- I fear he'll get part of it. - Kentucky, 2013-01-05, 09:29
  - I fear he'll get part of it. - jgt, 2013-01-05, 10:33

Resting. Surgery OK. - brionic, 2013-01-04, 16:38
- Prayers continue for the little guy. - mcassill, 2013-01-04, 16:42
- Thanks Brian. Been thinking of you all. - Hoot, 2013-01-04, 20:23
- Prayers for all of you. - Dave B, 2013-01-04, 21:42

Best Value .30-06 SP bullet for reloading - AaronB, 2013-01-04, 11:51
- Haven't priced them in a while... - Paul, 2013-01-04, 12:03
  - That does not make any sense to me.... - Byron, 2013-01-04, 14:04
    - After the second shot... - cas, 2013-01-04, 15:10
      - After the second shot... - Paul, 2013-01-04, 15:38
    - Inquiry yeilds more info than snap judgments do - Paul, 2013-01-04, 15:37
    - Wife gave me this for my last BD to hang in my shop - John K., 2013-01-04, 17:15
      - I appreciate all the discussion and humor, fellas... - AaronB, 2013-01-04, 19:05
        
        Remington 150 JSP has worked fine in my 1917 - Cherokee, 2013-01-04, 19:11
        
        Well... since "cheap" seems to be the operative word, - John K., 2013-01-04, 19:23
- Being a cheap so-and-so for many years now.... - Hoot, 2013-01-04, 20:36
- I would think any major brand 150-180 grain - bj, 2013-01-04, 21:15
- Best Value .30-06 SP bullet for reloading - Dave B, 2013-01-04, 21:44
  - Best Value .30-06 SP bullet for reloading - cubrock, 2013-01-04, 22:43
- Best Value .30-06 SP bullet for reloading - Lloyd Smale, 2013-01-05, 05:41
  - should have added that there 150 power points - Lloyd Smale, 2013-01-05, 05:42
    - I put a couple ton of meat on the table with - Bud, 2013-01-05, 18:18

1871/72 Open top vs 1851/60 Richards Mason conversion - Warhawk, 2013-01-04, 09:44
- I've owned these for a while... - Hoot, 2013-01-04, 09:54
  - I think these quit being "practical" about 1873 ... - Warhawk, 2013-01-04, 10:59
  - I've owned these for a while... - Catoosa, 2013-01-04, 21:38
- 1871/72 Open top vs 1851/60 Richards Mason conversion - cable, 2013-01-04, 11:06
  - There is a used 1851 Navy ... - Warhawk, 2013-01-04, 11:14
    - I bought the 1851 Navy conversion - Warhawk, 2013-01-04, 15:53
      - I bought the 1851 Navy conversion - cable, 2013-01-04, 15:57
        
        Yessir, brass GRIP frame ... - Warhawk, 2013-01-04, 17:17
        
        1851 Navy -- "natural pointer" - one of Sam's best! - nv25qJohn Meeker, 2013-01-05, 08:14
- 1871/72 Open top vs 1851/60 Richards Mason conversion - Slow Hand, 2013-01-04, 20:22
  - Group photo - Slow Hand, 2013-01-04, 20:39
    - Group photo - Warhawk, 2013-01-05, 12:40
      - I got to mess with both... - Bud, 2013-01-05, 18:26

Marines: They have a way with words... - Hoot, 2013-01-04, 09:41
- I would like to see a lot more outrage like that against the - Cherokee, 2013-01-04, 15:04
  - It's people like her that caused a militia to form in CT - stonewalrus, 2013-01-04, 15:32
    - We need a photoshopped version of her as a redcoat - stonewalrus, 2013-01-04, 15:36
  - I would like to see a lot more outrage like that against the - cable, 2013-01-04, 15:58
    - I would like to see a lot more outrage like that against the - Catoosa, 2013-01-04, 21:32
- I think Feinstein should have to personally come confiscate - stonewalrus, 2013-01-04, 15:29

Ever seen a left-handed monkey wrench? - Catoosa, 2013-01-03, 22:38
- Wow, we may be related. - MR, 2013-01-04, 09:33
  - Yep, DEE CAB is the correct pronounciation for we locals. - Murphy, 2013-01-04, 12:23
    - He lived between Avery and Annona. - MR, 2013-01-04, 16:19
  - It's Dee Cab County here in TN too - stonewalrus, 2013-01-04, 14:16
- passed up a good deal on one last weekend - stonewalrus, 2013-01-04, 14:14
  - PLY 25?? - Hoot, 2013-01-04, 20:48
    - Errrrrrr.. Hoot?? - Catoosa, 2013-01-04, 21:12
      - Errrrrrr.. Hoot?? - Slow Hand, 2013-01-04, 21:23
        
        Errrrrrr.. Hoot?? - mcassill, 2013-01-04, 21:46
      - As Mark and Doug state.. - Hoot, 2013-01-05, 08:46
        
        I'll have to start looking for a 25acp. Thanks - Edward Young, 2013-01-05, 10:31
        
        Thanks, Hoot and others.. - Catoosa, 2013-01-06, 20:19
    - that's the new polyymer framed version - stonewalrus, 2013-01-04, 21:14
      - Ahh...gotcha. - Hoot, 2013-01-05, 08:47

Attn: John Meeker - wood finish question for you - Paul, 2013-01-03, 20:43
- Rec'd & will post lat'r.............. - John Meeker, 2013-01-04, 09:10
  - post - John Meeker, 2013-01-04, 19:40
    - Thank you, sir... - Paul, 2013-01-05, 08:50
      - Y'r quite welcome & - nv25qJohn Meeker, 2013-01-06, 09:41

I see Winchester is producing an 1873 again...... - Otony, 2013-01-03, 20:11
- I see Winchester is producing an 1873 again...... - Bob Hatfield, 2013-01-04, 05:06
  - Most of the SASS crowd - Bud, 2013-01-04, 08:10
    - Most of the SASS crowd - Otony, 2013-01-04, 09:06
  - IIRC - Drago, 2013-01-04, 18:48

Atlas, GAF, Owens Corning shingles? - esisk, 2013-01-03, 18:25
- Pounded a few nails in my time. - Hoot, 2013-01-04, 07:17
- There was a point in time that metal roofing was compe- - Hobie, 2013-01-04, 08:08
  - Next spring I am putting a sheet metal roof on my house... - Byron, 2013-01-04, 14:06
    - I KNOW that you've done the math. When I last did my - Hobie, 2013-01-04, 20:22
  - There was a point in time that metal roofing was compe- - esisk, 2013-01-04, 22:37

Back Surgery - Dave B, 2013-01-03, 13:34
- had the same issue with my lower back - stonewalrus, 2013-01-03, 13:52
  - Thank You!! - Dave B, 2013-01-03, 16:21
  - had the same issue with my lower back - lee Jurras, 2013-01-03, 17:23
    - I'm loving this already.... - Byron, 2013-01-03, 21:53
- Teter... - Hobie, 2013-01-03, 18:13
- Back Surgery - Steve, 2013-01-03, 18:30
- Back Surgery - Art, 2013-01-03, 19:17
- FYI.... - Byron, 2013-01-03, 21:51
  - Byron, That matches up with my experiance to a t. - Rob Leahy, 2013-01-04, 10:11
- Ive been under the knife 5 times - Lloyd Smale, 2013-01-04, 04:56
- I want to thank all of you - Dave B, 2013-01-04, 08:13

Powder for .223? - Catoosa, 2013-01-02, 22:02
- Ramshot Tac is my favorite 223/5.56 powder - Mark Stevenson, 2013-01-02, 22:29
  - Ramshot Tac is my favorite 223/5.56 powder - Warhawk, 2013-01-02, 22:39
- Powder for .223? H335 - Rob Leahy, 2013-01-02, 22:43
  - Or WC844 - John K., 2013-01-02, 22:58
- Thousands of H335 loads with 55 gr Hornady's have gone - Cherokee, 2013-01-02, 23:23
- I like ramshot but prefer - Lloyd Smale, 2013-01-03, 04:08
- Varget. - woody, 2013-01-03, 04:56
- I keep going back to W748... - Hobie, 2013-01-03, 06:24
  - H322 for me... - Bud, 2013-01-03, 09:38
    - H322 did very well. For some reason, when I spent my - Hobie, 2013-01-03, 18:17
- Powder for .223? - Steve, 2013-01-03, 18:35
- Powder for .223? - Art, 2013-01-03, 19:07
- there are a lot of choices - bj, 2013-01-03, 21:18
  - I've used 4198 for my .222 - Hoot, 2013-01-04, 07:19
- Powder for .223? - Catoosa, 2013-01-04, 22:17

Any experience with the baby Cimarrons? - Slow Hand, 2013-01-02, 18:00
- Any experience with the baby Cimarrons? - Josh M., 2013-01-02, 18:56
- Any experience with the baby Cimarrons? - Harry O-1, 2013-01-03, 07:04

Freedom Arms 454 - Dave B, 2013-01-02, 17:21
- I've done it with mine. Just remember.... - Boge Quinn, 2013-01-02, 17:48
  - So it's just the residue - Dave B, 2013-01-02, 17:54
    - So it's just the residue - AkRay, 2013-01-02, 19:25
      - Same problem with 38spl's in 357 - Bud, 2013-01-03, 09:43
      - Thank you one and all. - Dave B, 2013-01-03, 13:30
- posted here years ago - bj, 2013-01-03, 21:20
  - Never heard that story... - Bud, 2013-01-04, 08:15

good LA riot footage - tell idiots who say nobody - stonewalrus, 2013-01-02, 15:21

A Worthwhile Youtube Video - Drago, 2013-01-02, 14:43
- This was great! - Dave B, 2013-01-02, 16:54
- Not new information, but very well put together... - Brian A, 2013-01-02, 19:55
  - Not new information, but very well put together... - uncowboy, 2013-01-05, 03:32

Here's one the national media will never pick up. - Wildcat, 2013-01-02, 14:42

.45 Vaquero barrel for sale -- 4 5/8 inches - Scribe, 2013-01-02, 08:25

Who's our resident shotgun expert? - Paul, 2013-01-01, 17:16
- Have put out y'r enquiry to some knowledgable gunners... - John Meeker, 2013-01-01, 20:36
- Who's our resident shotgun expert? - John Meeker, 2013-01-02, 06:18
  - more - John Meeker, 2013-01-02, 09:32
    - Thank you for the feedback - Paul, 2013-01-02, 10:43
      - O/U work very well and are quick to reload, - Rob Leahy, 2013-01-02, 11:20
        
        Cheap spanish doubles - Paul, 2013-01-02, 12:36
- Who's our resident shotgun expert? - Slow Hand, 2013-01-02, 09:13
  - Thanks, - Paul, 2013-01-02, 10:45
- Who's our resident shotgun expert? - jgt, 2013-01-02, 09:18
  - So you have the 525 sporting clays model? - Paul, 2013-01-02, 10:48
    - So you have the 525 sporting clays model? - jgt, 2013-01-03, 09:30
      - Thank you, sir! - Paul, 2013-01-03, 13:01
- Why, Charles of course. - AaronB, 2013-01-04, 13:18

She said, "Yes"! - Hoot, 2013-01-01, 10:10
- She said, "Yes"! - Slow Hand, 2013-01-01, 10:14
- Congrats Hoot!!!!! - TomC, 2013-01-01, 10:15
- Congrads Hoot. - Gunner, 2013-01-01, 10:36
  - Congrads Hoot. - Dennis Eugene, 2013-01-01, 10:47
- She said, "Yes"! - lee jurras, 2013-01-01, 10:51
- Congratulations Hoot! - MR, 2013-01-01, 11:09
  - He did that last spring. You missed out :-) - mcassill, 2013-01-01, 11:15
    - Yes I did. I do not intend to let that happen again! - MR, 2013-01-01, 11:32
  - Congratulations Hoot! - Tom Richardson, 2013-01-01, 18:56
- That is awesome. She is a sweet lady. - mcassill, 2013-01-01, 11:10
- Congradulations to you both! - Rob Leahy, 2013-01-01, 11:26
- Truly Wonderful - Charles, 2013-01-01, 11:29
- Poor girl... - AaronB, 2013-01-01, 11:34
- Condolences to the unfortunate girl - Jhenry, 2013-01-01, 11:43
- Congratulations! - Hobie, 2013-01-01, 12:12
- God Bless. Couldn't happen to nicer folks. - John Meeker, 2013-01-01, 12:14
- This is fantastic news! - Murphy, 2013-01-01, 13:11
- Congratulations, Hoot. You make a terrific - brionic, 2013-01-01, 13:23
- Congratulations - Edward Young, 2013-01-01, 13:35
- Congratulations !! May God grant you many blessings. - Cherokee, 2013-01-01, 14:01
- Congratulations Hoot! - Sarge, 2013-01-01, 14:55
- She said, "Yes"! - Fivegunner, 2013-01-01, 14:57
- Great! - stonewalrus, 2013-01-01, 17:14
- Congratulations!!!!!!!!! - JD, 2013-01-01, 18:32
- She said, "Yes"! - Tom Richardson, 2013-01-01, 18:58
  - She said, "Yes"! - BJ Snow, 2013-01-01, 19:49
- Congrats to both of you!! - Brian A, 2013-01-01, 20:11
- Congradulations!! - madbohemian, 2013-01-02, 08:19
- Every blessing!! - Mike P, 2013-01-02, 13:43
- Congratulations! - Drago, 2013-01-02, 14:44
- She said, "Yes"! - Jared, 2013-01-02, 20:55
- Great news, Hoot! - Cannon, 2013-01-02, 21:52
- Many best wishes to you both! - Catoosa, 2013-01-02, 22:09
- Again, congrats my friend - Mark Stevenson, 2013-01-02, 22:35
- Thank you all so much. - Hoot, 2013-01-04, 07:14

Contact your representatives - SubDoc, 2012-12-31, 17:47
- Contact your representatives - Murphy, 2012-12-31, 20:55
  - Preaching to the Choir - SubDoc, 2013-01-01, 12:26
    - Preaching to the Choir - Murphy, 2013-01-01, 13:33
      - Done!! - Kentucky, 2013-01-02, 08:23

Brooks County Texas - Charles, 2012-12-31, 14:10
- They walk all that way to Brooks County and then some? - Hobie, 2012-12-31, 15:28
  - They walk all that way to Brooks County and then some? - Charles, 2012-12-31, 15:47
    - I looked at it with google map and it seems pretty empty but - Hobie, 2012-12-31, 16:59
      - I looked at it with google map and it seems pretty empty but - Charles, 2013-01-01, 11:25
        
        King Ranch....... - Byron, 2013-01-01, 12:11
- Brooks County Texas - woody, 2012-12-31, 18:09
  - Brooks County Texas - jgt, 2013-01-01, 10:01
  - Brooks County Texas - Charles, 2013-01-01, 11:17
    - Wetbacks............. - Byron, 2013-01-01, 11:41
      - Wetbacks............. - Charles, 2013-01-01, 12:29
        
        Accept the good folks no matter the culture and language - Rob Leahy, 2013-01-01, 13:23
      - I remember a young, broke soldier hitchhicking from King - Hobie, 2013-01-01, 15:13
  - Brooks County Texas - bpjon, 2013-01-01, 20:12
    - Brooks County Texas - jgt, 2013-01-02, 10:25
      - Brooks County Texas - Charles, 2013-01-02, 11:35
        
        Brooks County Texas - jgt, 2013-01-02, 21:09
        
        Brooks County Texas - Charles, 2013-01-03, 07:32
        
        You are already being taxed to pay for Obamacare... - Hobie, 2013-01-03, 18:18
        
        You are already being taxed to pay for Obamacare... - Charles, 2013-01-04, 06:09
        
        As a military retiree, I am already experiencing that and - Hobie, 2013-01-05, 15:30

Good Videa Link... - Boge Quinn, 2012-12-31, 09:49

May 2013 be full of blessings for all y'all. Happy New Year! - Paul, 2012-12-31, 08:20
- May 2013 be full of blessings for all y'all. Happy New Year! - Cherokee, 2012-12-31, 11:52
- May 2013 be full of blessings for all y'all. Happy New Year! - Hobie, 2012-12-31, 15:30

there trying to put tax stamps on our ars. - Lloyd Smale, 2012-12-31, 04:40
- They're trying to put tax stamps on our ars. - Paul, 2012-12-31, 08:22
- That's how I believe they will proceed . . . - Kentucky, 2012-12-31, 09:49
  - Good thing we all sold em at the local swap meet... - Rob Leahy, 2012-12-31, 10:18
    - Good thing we all sold em at the local swap meet... - Frank S, 2012-12-31, 11:25
    - Good thing we all sold em at the local swap meet... - Catoosa, 2012-12-31, 11:54
    - I am a profiteer.... - Hobie, 2012-12-31, 13:21
      - Is that anything like a privateer? - stonewalrus, 2012-12-31, 14:05
        
        It might be... I sold the AR to make some money due to the - Hobie, 2012-12-31, 15:32
        
        It might be... I sold the AR to make some money due to the - Otony, 2012-12-31, 18:07
- there trying to put tax stamps on our ars. - Slow Hand, 2013-01-01, 10:13
- Lloyd, I apologize. I know this is serious but... - Hoot, 2013-01-04, 07:22

My new Ruger SR1911 - Dennis Eugene, 2012-12-30, 19:30
- My new Ruger SR1911 - Cherokee, 2012-12-31, 08:00
- My new Ruger SR1911 - Amerileiro, 2013-01-02, 10:39
- Nice Dennis. - Hoot, 2013-01-04, 07:24

WTB bullet mold handles - woody, 2012-12-30, 09:18
- WTB bullet mold handles - Slow Hand, 2012-12-30, 16:59
  - Goodwill was the place where I bought my latest mold... - Paul, 2012-12-31, 08:26

Cow Elk meat hunt in Texas - Warhawk, 2012-12-30, 08:57
- Cow Elk meat hunt in Texas - woody, 2012-12-30, 09:47
  - Cow Elk meat hunt in Texas - Warhawk, 2012-12-30, 10:52
    - Left Ammo at home? That's never happened to me...very much! - Rob Leahy, 2012-12-30, 11:10
      - Left Ammo at home? That's never happened to me...very much! - Warhawk, 2012-12-30, 16:19
- Cow Elk meat hunt in Texas - Jared, 2012-12-30, 18:20
  - Cow Elk meat hunt in Texas - Warhawk, 2012-12-30, 19:20
    - Cow Elk meat hunt in Texas - Jared, 2012-12-30, 19:53
      - Cow Elk meat hunt in Texas - Warhawk, 2012-12-30, 20:49
        
        Cow Elk meat hunt in Texas - Jared, 2012-12-31, 21:24
- Good show Sir! - Hoot, 2013-01-04, 07:25
  - Good show Sir! - uncowboy, 2013-01-05, 03:38
    - Thanks for the confirmation about the 240 XTP - Warhawk, 2013-01-05, 12:43