The Frontier Sixshooter Community Message Board

Lawrence holster ID help please. - Andrew, 2013-09-22, 16:13
- Although, trying a couple guns in it revealed.... - Andrew, 2013-09-22, 16:26
  - #522=999, 6" Colt Police Positive Spl.,Ivar Johnson Sealed 8 - Rob Leahy, 2013-09-22, 17:41
    - Dang! Stumbled into a direct hit for the Sportsman! - Andrew, 2013-09-22, 17:47
      - You did well! - Rob Leahy, 2013-09-22, 17:51
        
        That little scuff on the back seen in the 2nd picture - Andrew, 2013-09-22, 21:39
        
        That little scuff -I wasn;t going to mention it. But, since - Rob Leahy, 2013-09-22, 21:52
        
        Probably should just send the Sportsman too. - Andrew, 2013-09-22, 22:36
        
        both...and the ammo:-) - Rob Leahy, 2013-09-22, 22:54
  - That is one sweet rig! - Hoot, 2013-09-23, 07:33
- Lawrence holster ID help please. - Hobie, 2013-09-22, 19:51
  - my 6" PP Target: I thoughtn that you had one.. - Rob Leahy, 2013-09-22, 21:29
    - my 6" PP Target: I thoughtn that you had one.. - Hobie, 2013-09-23, 07:39

A while back.... - Glen, 2013-09-22, 14:41
- looks mighty purtyfull..... - Amerileiro, 2013-09-22, 15:25
  - looks mighty purtyfull..... - uncowboy, 2013-09-22, 15:42
- ...and it shoots well too! - Glen, 2013-09-23, 15:14
  - Hum...nobody got the word to you or that gun that older .45 - Rob Leahy, 2013-09-23, 18:43
    - Nope, this one.... - Glen, 2013-09-23, 18:51

H&R Sportsman, finally shot it. - Rob Leahy, 2013-09-22, 11:22
- Sounds like a fine day!!! - woody, 2013-09-22, 13:48
- Dandy way to spend a Saturday. - Hoot, 2013-09-23, 07:38

Kenya Mall Murders - stonewalrus, 2013-09-22, 09:43
- Don't go or ignore signs...two choices, make your own - Rob Leahy, 2013-09-22, 09:50
- Where is the call for stricter gun laws in Kenya? - Hoot, 2013-09-22, 10:38
- Kenya Mall Murders - Catoosa, 2013-09-22, 22:20
- Have you noticed it's gun control "advocates" and gun - stonewalrus, 2013-09-23, 05:52
  - Yep. "Right wing extremist", etc. - Hoot, 2013-09-23, 07:40
- Kenya Mall Murders - Art, 2013-09-23, 19:08
  - YEP! Go armed discreetly... - Rob Leahy, 2013-09-23, 19:22
    - Agreed Rob. - Hoot, 2013-09-24, 08:07

Deer season starts here next Saturday... - pokynojoe, 2013-09-22, 08:40
- Good luck! (nm) - Glen, 2013-09-22, 08:47
- Cool bow! Have a good time. - Rob Leahy, 2013-09-22, 09:52
- Go get 'em Joe! - Hoot, 2013-09-22, 10:39
- Nice looking bow.... - woody, 2013-09-22, 14:45

A gentle reminder about language use on this forum - webservant, 2013-09-22, 07:31

Back from DC. Worked, walked, experienced a lot - brionic, 2013-09-21, 19:00
- Back from DC. Worked, walked, experienced a lot - Jhenry, 2013-09-21, 22:21
- Now, they get it. worth the whole trip - Rob Leahy, 2013-09-22, 10:00
- Sounds like a good trip. - Hoot, 2013-09-22, 10:41
  - Belly of the beast. Should be hallmark of our freedoms and - Rob Leahy, 2013-09-22, 22:56
    - Much like everything else, the institutions rule the day - brionic, 2013-09-23, 10:31
- That is awesome. - mcassill, 2013-09-23, 20:10

She's virginal no more! - Slow Hand, 2013-09-21, 18:14
- She's ready for action - Cherokee, 2013-09-21, 19:00
- For some reason I am the same way with most snubbies. - Jared, 2013-09-21, 22:31
  - For some reason I am the same way with most snubbies. - Slow Hand, 2013-09-22, 08:08
    - You can find some wood CA grips on fleabay. - Rob Leahy, 2013-09-22, 09:58

FS: Ruger New Model Bearcat Shopkeeper, 22 LR, NIB... - matt/pa, 2013-09-21, 17:12

FS: Glock 30S, 45 ACP, NIB... - matt/pa, 2013-09-21, 17:11

Rick Gittlein tooled T3Ps - Rob Leahy, 2013-09-21, 14:49
- Rick Gittlein tooled T3Ps - Cherokee, 2013-09-21, 15:00
- He does good work. - Hoot, 2013-09-22, 10:42

19 years Later, Andrew Brown remembers a simular shooting - Rob Leahy, 2013-09-21, 12:36
- Thanks Rob - Jhenry, 2013-09-22, 09:20
  - Fairchild AFB had 2 big tragedies within months. Both - Rob Leahy, 2013-09-22, 10:16
    - Fairchild AFB had 2 big tragedies within months. Both - Catoosa, 2013-09-22, 21:44

I did some horse trading last night - ScottL, 2013-09-21, 09:00
- Sweet! - rob, 2013-09-21, 09:57
- More info - ScottL, 2013-09-21, 10:05
  - Sweet looking popper.. - Murphy, 2013-09-21, 12:22
- I did some horse trading last night - Catoosa, 2013-09-21, 21:11
  - The bow - ScottL, 2013-09-22, 15:07
    - The bow - Catoosa, 2013-09-22, 22:00
- I like it. - Hoot, 2013-09-22, 10:44
- Good looking thumb buster, - Sarge, 2013-09-22, 14:57

Well, tomorrow I give my baby girl away... - rob, 2013-09-20, 23:12
- Well, tomorrow I give my baby girl away... - Slow Hand, 2013-09-21, 05:15
  - She could have done a lot worse... - rob, 2013-09-21, 08:33
    - She could have done a lot worse... - Fowler, 2013-09-21, 08:41
    - She could have done a lot worse... - ScottL, 2013-09-21, 08:49
      - Trust me Brother... - rob, 2013-09-21, 09:51
- Congratulations! I hope you all have a blessed day. He - Rob Leahy, 2013-09-21, 11:21
- Well, tomorrow I give my baby girl away... - Charles, 2013-09-21, 12:03
- Well, tomorrow I give my baby girl away... - Murphy, 2013-09-21, 12:16
- Well, tomorrow I give my baby girl away... - Cherokee, 2013-09-21, 14:56
- Hope it all went well Rob. - Hoot, 2013-09-22, 10:45
  - Thanks Hoot...picture... - rob, 2013-09-22, 16:41
    - If I may say, - Hoot, 2013-09-23, 07:44
      - Thanks Hoot:) - rob, 2013-09-24, 07:08

I pulled a couple of those 9mm cast 124's - Slow Hand, 2013-09-20, 20:12
- Just use a std taper crimp die. - anachronism, 2013-09-20, 20:51
  - I just use a taper crimp die too. - Jared, 2013-09-20, 20:57
- I stopped using the FCD on straight wall stuff... - rob, 2013-09-20, 23:17
  - The factory crimp die in handguns is designed to - Todd C, 2013-09-21, 08:25
    - I did this too. - anachronism, 2013-09-21, 09:01
    - Just looked at my ACP die.... - rob, 2013-09-21, 09:46
      - Just looked at my ACP die.... - Jared, 2013-09-21, 12:46
    - How did you get the ring out? - rob, 2013-09-21, 09:50
      - How did you get the ring out? - anachronism, 2013-09-22, 09:05
        
        That sounds good... - rob, 2013-09-22, 17:13
- I pulled a couple of those 9mm cast 124's - Cherokee, 2013-09-21, 14:54

how do threads and barrel size compare between ruger single - cable, 2013-09-20, 15:50
- how do threads and barrel size compare between ruger single - Gary G, 2013-09-20, 19:18
  - Will do,; i need a 357 with the front ramp sight since this - cable, 2013-09-20, 19:26
  - oops l dont have your email but let me know what you have - cable, 2013-09-20, 19:29
    - oops l dont have your email but let me know what you have - Gary G, 2013-09-20, 19:32

Prayer request for a friend. - Murphy, 2013-09-20, 14:18
- You got it Murph. - MR, 2013-09-20, 18:07
- You bet - Rob Leahy, 2013-09-20, 18:59
- Done. - Jared, 2013-09-20, 20:09
- You got it Murphy... - rob, 2013-09-21, 08:36
- Done - Cherokee, 2013-09-21, 14:49
- You bet Murphy. - Hoot, 2013-09-22, 10:46

1911 230 cast TC advice needed... - rob, 2013-09-20, 14:14
- 1911 230 cast TC advice needed... - the Alsatian, 2013-09-20, 18:37
  - The problem with these truncated cone bullets... - rob, 2013-09-20, 23:25
- This might be helpful... - Sarge, 2013-09-20, 20:32
  - I forgot about that... - rob, 2013-09-20, 23:30
- 1911 230 cast TC advice needed... - Charles, 2013-09-21, 12:10
- 1911 230 cast TC advice needed... - Cherokee, 2013-09-21, 14:47
  - That's the same mould I have... - rob, 2013-09-21, 23:00

Uhhhh....what? - Hoot, 2013-09-20, 08:07
- Uhhhh....what? - stonecoldrc, 2013-09-20, 08:17
  - Uhhhh....what? - uncowboy, 2013-09-20, 10:34
    - Yeah, I had a Pachmayr Dominator in .223.... - Glen, 2013-09-20, 14:04
      - Well, I'll be. - Hoot, 2013-09-22, 10:48
- Uhhhh....what? - Murphy, 2013-09-20, 13:48
- Uhhhh....what? - Cherokee, 2013-09-21, 14:39

Cancer-Free One Year Today! - Scribe, 2013-09-20, 07:04
- CONGRATULATIONS!! - Hoot, 2013-09-20, 08:08
- YEE-HAW!!! - Glen, 2013-09-20, 09:02
- Great to hear! - cas, 2013-09-20, 10:27
- I am so glad to hear that !! made my day ! - cable, 2013-09-20, 11:03
- Kevin, that makes me Very glad to hear that ! - Rob Leahy, 2013-09-20, 11:25
- Praise be to The Great Physician! (nm) - Boge Quinn, 2013-09-20, 13:30
- Cancer-Free One Year Today! - Murphy, 2013-09-20, 13:48
- That's great!! - Slow Hand, 2013-09-20, 16:48
- Cancer-Free One Year Today! - the Alsatian, 2013-09-20, 18:25
- That's awesome news! - rob, 2013-09-21, 10:01
- Cancer-Free One Year Today! - Cherokee, 2013-09-21, 14:37

Something different - always wanted something like this - John K., 2013-09-19, 20:23
- perfect truck gun. - Rob Leahy, 2013-09-19, 20:34
  - Or tractor/boat/backpack. - John K., 2013-09-19, 21:06
- That looks like the same stock I put on mine but I - stonewalrus, 2013-09-19, 20:35
  - That looks like the same stock I put on mine but I - John K., 2013-09-19, 21:09
- What stock is that, anyhoo? - Otony, 2013-09-19, 20:51
  - AGP Arms. - John K., 2013-09-19, 21:03
- Sights n' such for a SBR - Catoosa, 2013-09-19, 21:31
  - Sights n' such for a SBR - Warhawk, 2013-09-19, 23:52
    - Sights n' such for a SBR - John K., 2013-09-20, 05:47
- Something different - always wanted something like this - Cannon, 2013-09-19, 22:22
  - Thanks, Cannon! Lots of utility in the small packages. - John K., 2013-09-20, 05:41
- Something different - always wanted something like this - Slow Hand, 2013-09-20, 04:07
  - I've seen the open bolt posties; they are supposed to be - John K., 2013-09-20, 05:38
- John, have you figured out what sling mount it would take - stonewalrus, 2013-09-24, 22:12

The answer to my question - ScottL, 2013-09-19, 19:44
- An XDs .45 and training is a great anwesr to the question... - Rob Leahy, 2013-09-19, 20:16
  - An XDs .45 and training is a great anwesr to the question... - Flatlander, 2013-09-19, 21:59
- The answer to my question - Warhawk, 2013-09-19, 23:54
  - Me too! - Rob Leahy, 2013-09-20, 11:23
- Good choice... - matt/pa, 2013-09-20, 12:28
- Call me wrong, but.... - Murphy, 2013-09-20, 13:54
  - Myrph, with the extended magazine, these XDs' feel like - Rob Leahy, 2013-09-20, 19:23
    - Shoot like one too. - Jared, 2013-09-20, 20:08
  - You're not wrong... - rob, 2013-09-21, 10:19

CZ Pistols - Art, 2013-09-19, 19:18
- Art My Czs have SMOOOOOTH triggers in DA and crips SA - Rob Leahy, 2013-09-19, 19:27
  - Art My Czs have SMOOOOOTH triggers in DA and crips SA - Art, 2013-09-19, 19:52
- CZ Pistols - There's no flies on the CZ's. - MR, 2013-09-19, 19:37
  - CZ Pistols - There's no flies on the CZ's. - Art, 2013-09-19, 19:53
  - 9bple - bpjon, 2013-09-20, 09:33
- I've been shooting a CZ 75 - cas, 2013-09-20, 10:32
- CZ Pistols - JD, 2013-09-20, 15:08
- I have the Italian Tanfoglio (Witness) copy - awesome - stonewalrus, 2013-09-20, 18:08

I am looking for a 5" 1911 Slide and seprately a LWT - Rob Leahy, 2013-09-19, 18:31
- I am looking for a 5" 1911 Slide and seprately a LWT - Gary G, 2013-09-20, 19:02
  - Thanks Gary! I'll e-mail right now. - Rob Leahy, 2013-09-21, 12:08

I like this gal Emily; - Rob Leahy, 2013-09-19, 18:13
- I like this gal Emily; - Warhawk, 2013-09-19, 23:55

Dual cylinder Ruger Bearcat - The Alsatian, 2013-09-19, 16:15
- Dual cylinder Ruger Bearcat - Fivegunner, 2013-09-19, 16:29
  - Dual cylinder Ruger Bearcat - The Alsatian, 2013-09-19, 16:34
    - Brother, I would LOVE to have one of those... - Boge Quinn, 2013-09-19, 17:31
      - Brother, I would LOVE to have one of those... - the Alsatian, 2013-09-20, 18:22
        
        I know you would, brother, and I do appreciate that... - Boge Quinn, 2013-09-22, 13:33
    - Matt or Jack Or Steve will be along shortly to - Rob Leahy, 2013-09-19, 18:03
- Good to see your handle again Sir. - Hoot, 2013-09-20, 08:11
  - Good to see your handle again Sir. - the Alsatian, 2013-09-20, 18:18
    - I don't really know. - Hoot, 2013-09-23, 07:45
- Great gun, Scott... - matt/pa, 2013-09-20, 12:25

Paging Lee J. - matt/pa, 2013-09-19, 08:05
- Paging Lee J. - Lee J., 2013-09-19, 13:52
  - Paging Lee J. - Lee J., 2013-09-19, 18:06

Cast bullets key holing in 9mm? - Slow Hand, 2013-09-19, 07:33
- My CZ keyholes cast 124gr bullets - cas, 2013-09-19, 09:36
- Cast bullets key holing in 9mm? - Jared, 2013-09-19, 12:03
- Cast bullets key holing in 9mm? - Cannon, 2013-09-19, 16:18
- what crimp die are you using? - anachronism, 2013-09-19, 16:21
- I'll pull one and measure it. - Slow Hand, 2013-09-19, 17:54
- Cast bullets key holing in 9mm? - Cherokee, 2013-09-19, 20:00

Attn ROB - Lee J., 2013-09-18, 20:17
- OK, but not as crude... - Rob Leahy, 2013-09-18, 21:28
  - OK, but not as crude... - Lee J., 2013-09-18, 22:03
  - OK, but not as crude... - Lee J., 2013-09-19, 13:58
    - OK, but not as crude... - Creeker, 2013-09-19, 19:51
      - OK, but not as crude... - Lee J., 2013-09-19, 21:15

Project guns - Glen, 2013-09-18, 18:53
- Real cool!!! - woody, 2013-09-18, 19:18
  - The hammer.... - Glen, 2013-09-18, 22:39
- Looks great. - Jared, 2013-09-18, 19:20
- Great, ready to roll.. - Cherokee, 2013-09-18, 20:03
- If'n I was gonna do one, and not sayin' I wouldn't,... - Hoot, 2013-09-18, 21:11
  - If'n I was gonna do one, and not sayin' I wouldn't,... - Lee J., 2013-09-18, 22:07
- Ran about 100 rounds through it.... - Glen, 2013-09-19, 20:13