Rechambering a .22lr rifle barrel to .22 WMR
by Don Sikes 
, Vera Cruz, Missouri, Friday, June 30, 2023, 14:50 (511 days ago)
Ok... so here's what I got... I have an old Rossi .22lr/.410 youth combo single shot rifle/shotgun combo... I have the .410 barrel and 2 each .22lr barrels... I'd like to rechamber one of the .22lr barrels to .22WMR that way I'll have a .410/.22lr/.22WMR shotgun/rifle combo for outback packing...
I've been looking for a gunsmith in my area that can rechamber one of the .22lr barrels but because I live out in the boonies, there ain't one... so my question to you is... who would you recomend I send my .22lr barrel to to have it rechambered or... If possible one of ya'll might have a rechambering tool and be able to rechamber it for me...
I appreciate ya'lls help in this...
I am sure Gary Reeder could do it. Most any gunsmith could.
I have done it myself the down and dirty way. Ain't fun but it worked. I started with a slightly undersize drill bit .. went slow ... then used a fired .22 Magnum cartridge fixed to a screw with the head cut off so I could put it in an electric drill. Valve grinding compound on the .22 Magnum and lapped out the chamber to the correct size. Took a few days of careful work but made a nice rifle when I was done. My daughter used it to kill her first Javelina when she was 11. I used a Mossberg barrel.
![[image]](images/uploaded/20230630205244649f409c6e8e8.jpg)
![[image]](images/uploaded/20230630205342649f40d603b62.jpg)
--
Ele era velho.
Ele era corajoso.
Ele era feio.
Jim, wasn’t it you who…
by Slow Hand 
, Indiana, Sunday, July 02, 2023, 09:14 (510 days ago) @ JimT
Bored out one chamber of a single six to magnum? I swear I read about that and it seems like the type of thing you’d do.
It was my Dad.
He bought a new Single Six in 1963. Turned out to have a bad barrel from the factory. Ruger said they would replace it free of charge. He decided to rebarrel it himself. He had a Model 52 Winchester target barrel so he whacked off a piece and made a 6 1/2" barrel .. fitted it to the frame ... Taylor throated it .. rechambered one chamber in the cylinder to .22 Magnum ... lightened the hammer ... straightened the trigger .. made a super accurate sixgun out of it.
![[image]](images/uploaded/2023070218143164a1be8739a5e.jpg)
.22 Magnum chamber. Since you carry with the hammer down on an empty chamber this made perfect sense.
![[image]](images/uploaded/2023070218151764a1beb51eeb4.jpg)
Speed hammer
![[image]](images/uploaded/2023070218154264a1becec585e.jpg)
Straightened trigger
![[image]](images/uploaded/2023070218161464a1beeeef212.jpg)
![[image]](images/uploaded/2023070218165964a1bf1b28cb1.jpg)
--
Ele era velho.
Ele era corajoso.
Ele era feio.
It was my Dad.
by Slow Hand , Indiana, Sunday, July 02, 2023, 15:50 (509 days ago) @ JimT
That’s great; thanks for the correction and further info! I have an old Remington Rolling Block that has a later ‘green’ parkerized barrel installed. Not sure what it’s off of, 514T maybe? It’s pretty danged accurate and I need to shoot it more.