Pin fire pistoleroing
by Paul 
, Friday, January 20, 2023, 09:00 (677 days ago)
Here's an interesting bit of videography detailing the elaboration of some 11mm pinfire rounds using 45 ACP brass as the basic case for forming.
https://www.youtube.com/watch?v=abviqBSZN80
And here's the video on testing, including post range trip diagnosis.
https://www.youtube.com/watch?v=i-NExsk8TtY
I've been intrigued by the pinfire system for some time. It's good to see someone else so afflicted - and with the means to scratch the itch. 
This priming system makes a lot of sense
by Paul , Friday, January 20, 2023, 09:52 (676 days ago) @ Paul
I suspect this system would be very adaptable to the 11mm revolver or other pinfire system rounds that one can use a regular modern cartridge to form from.
Seems like a good use for small primer cases.
by Hoot 
, Diversityville, Liberal-sota, Friday, January 20, 2023, 10:27 (676 days ago) @ Paul
I don't have the equipment required (wish I did) but it's interesting. I note that he didn't really have any lube during the loading.
Seems like a good use for small primer cases.
by Paul , Friday, January 20, 2023, 10:38 (676 days ago) @ Hoot
I noticed that as well. Seems like a grease cookie underneath the slug would at least leave some lube for subsequent shots. Small primer cases bored out for a percussion cap carrier like the other video shows should work dandy. Although I don't know how the extractor groove would affect the placement of the pin. Makes me wish I had a chance to play some with the idea.
I'll send all my small primer cases to you then...
by Hoot , Diversityville, Liberal-sota, Friday, January 20, 2023, 11:54 (676 days ago) @ Paul
in anticipation of your experiments. 