32-20 Brass
by Dave B 
, Alamogordo New Mexico, Wednesday, March 03, 2021, 15:25 (1361 days ago)
It was bound to happen, got caught with my pants down. Been trying to shoot calibers that are more thrifty in regards to powder. I have discovered my 32-20 brass stash is woefully inadequate, and I have a bunch with beginning neck splits.
Dave
32-20 Brass
by Cherokee , Medina, Ohio, Wednesday, March 03, 2021, 16:38 (1361 days ago) @ Dave B
I can help there, how many you need?
32-20 Brass
by Dave B , Alamogordo New Mexico, Wednesday, March 03, 2021, 20:14 (1361 days ago) @ Cherokee
Would like 100, but at this point, I will not be picky.
Dave
32-20 Brass
by Cherokee , Medina, Ohio, Thursday, March 04, 2021, 06:33 (1360 days ago) @ Dave B
PM sent.
anneal?
by bj , Wednesday, March 03, 2021, 18:06 (1361 days ago) @ Dave B
I've read that if you anneal your current brass with a propane torch you can extend the life of what you have. You would have to search the net for instructions.
anneal?
by Dave B , Alamogordo New Mexico, Wednesday, March 03, 2021, 20:22 (1361 days ago) @ bj
I learned a hard lesson. I was loading these on my Dillon 550, big mistake, I am using Lyman dies, with a Lee FCD. Well the powder die was working the brass way too much. So now I am using the Lyman M die that came in the set, and it does a much better job without overworking the brass. The brass that split were all RP nickle plated. I need to find someone to solder a new front sight on this butchered Buckeye Special. Currently I am shooting powder coated RCBS SWC at 102 gr, over 4.4 gr of Power Pistol, shoots about a 8"-9" high at 25. Still such a fun cartridge as I have gained years of "wisdom".
Dave
Front sight...
by Paul 
, Thursday, March 04, 2021, 06:49 (1360 days ago) @ Dave B
You might give Fermin Garza a holler about your front sight. He's producing some very good options and can help you with the height that you need.
Web site
by Paul , Thursday, March 04, 2021, 07:15 (1360 days ago) @ Dave B
Web site
by Dave B , Alamogordo New Mexico, Friday, March 05, 2021, 19:15 (1359 days ago) @ Paul
I'm going to be giving him a call.
anneal?
by bj , Thursday, March 04, 2021, 11:46 (1360 days ago) @ Dave B
I'm not sure if you can anneal nickle plated brass the same way and I've heard that it is more prone to split.
Brittle nickel brass
by Slow Hand , Indiana, Thursday, March 04, 2021, 19:17 (1360 days ago) @ bj
I’ve reloaded plenty of .38 and .357 nickeled brass with no trouble, even having some 38 brass that is mostly brass as it’s been reloaded so many times that the nickel has mostly worn off. But, I still remember a 100 piece bag of Remington nickel brass I bought brand new. I had I bet 1/4 to 1/3 of them split the first firing. And about the same amount the second firing or while resizing. Not case mouths either, splits from mouth about 90% of the way to the extractor groove. I’m prettty sure I pitched the rest just to me safe, and that was back when I was young and really broke, so that meant something! I’ve been leery of nickeled brass since then!
Brittle nickel brass
by Dave B , Alamogordo New Mexico, Friday, March 05, 2021, 19:16 (1359 days ago) @ Slow Hand
I certainly prefer my brass to be yeller.
Dave
32-20 Brass
Since the shortages, I have had to make do with forming .32 w.c.f. from these.....
https://www.grafs.com/retail/catalog/product/productId/77289
Requires quite a bit of trimming.
32-20 Brass
by Dave B , Alamogordo New Mexico, Wednesday, March 03, 2021, 20:15 (1361 days ago) @ RayLee
Learned something new here!
Dave
Used to go the other way! My how times change...
by Hobie , Shenandoah Valley of Virginia, Thursday, March 04, 2021, 13:53 (1360 days ago) @ RayLee
As an aside, I had a woman come in to the shop at the height of the gun run with a Nagant hoping we would be able to tell her what ammo it used and walked out VERY happy with a now usable revolver and a couple of boxes of fresh factory ammo. People are digging out EVERYTHING it preparation for the coming storm. They (and whatever group(s) they are in does not matter) BELIEVE it IS coming...
--
Sincerely,
Hobie
Used to go the other way! My how times change...
by Slow Hand , Indiana, Thursday, March 04, 2021, 19:19 (1360 days ago) @ Hobie
I remember reading articles about the same thing, using .32/20 brass to make ‘short’ nagant ammo.
To your other point, I have seen some odd stuff listed on the local classifieds pages. Now is not th beets time to get into another caliber...
Used to go the other way! My how times change...
by Dave B , Alamogordo New Mexico, Friday, March 05, 2021, 19:16 (1359 days ago) @ Hobie
Amen Brother!