The Sixshooter Community Website

The Frontier Sixshooter Community Message Board

Back to the forum index

Linear

I have had this Smith Model 624 (6.5" bbl) for about 10 years now. Accurate and a pleasure to shoot. A bit "big", but not too terribly heavy at 42 OZ, with good sights and a trigger dreams are made of.

So why would I not sell this revolver?

Anytime a discussion about the .44 special comes up (I ain't talking about Keith loads here, either; more like the well-touted Skeeter load or "Category 2" Pearce loads), folks run around waving their arms about blowing up guns, maiming one and all, and all sorts of general mayhem. Still we have no official +P data for modern strong revolvers (and there are now many around), so we can go forth and handload with confidence. Nope, we are told to go get a .44 magnum if we want to hotrod specials way on up to 1000 fps with standard for caliber bullet weights.

Are "they" right? What is the purpose to own anything without a Magnum stamp on the barrel? Golly, are we risking life and limb here? Other than a part of a collection, is there ANY real-world use for a moderately loaded .44 special? Why would I want an N-frame for 240 grains at 750 fps? Do I dare use those other loads in an N-frame? Oh my.

regards and :banghead:
jb

1669 views

That load will do just about any normal thing you want to do. I shoot those level of loads in my 44 Mag, don't need the Mag level. Enjoy...

1660 views

NO EXPLANATION IS NECESSARY; FOR THOSE WHO DON'T NO EXPLANATION IS POSSIBLE.

1642 views

Jerry:

The .44 Special loaded to about 1000 fps is a perfect cartridge for just about anything you can reasonably do with a handgun. (So is the .41 Magnum loaded to the same velocity and placed in a Freedom Arms Model 97, but I digress.)

Ignore the naysayers.

1574 views

and personally think it built for 700-1000fps 200-240gr loads since it was a Russian, American, New Century, etc. And find the handle intolerable with anything more, unless a glutton for punishment. The later developments only to satisfy American "if this is good, more must be better, and a lot LOT more approaches perfection, or, at least, bragging rights."

1657 views

Skeeter's load of 7.5 grains of Unique with a 250 grain lead SWC is just about perfect. It will penetrate and provides enough power for just about anything, yet the pressure is low enough that it won't cause any undue strain on a modern N frame or single action revolver. Skeeter shot thousands of this load through his 44 Specials... Probably tens of thousands of rounds with no harm to the gun. I've shot thousands of rounds through my single actions with nary a hiccup.

To me it is THE perfect round. Enough power and penetration to take care of virtually any situation, yet not abusive to the shooter or the revolver.....

1592 views

I’m getting the vibe that you are posting in jest, but, ironically, there is an article in the newest handloader in ‘+P .44 Special loads’. I haven’t even taken the plastic off just yet but I’m sure there is some good info within.

--
https://facebook.com/M2bKydex/

1594 views

There's more than a couple of zippers in the lot.

But, I am a bit confused (probably just need to read the piece). The loads are classified as 'Category 2' and 'Category 3' loads but I see no mention of 'Category 1'. I'll have to read the article today and see if illumination comes.

1582 views

Category 1 are the low pressure loads in the original Pearce article from 2009(?). Is the new article basically a remake of that original publication?

1592 views

It does explain Cats 1, 2 & 3 but I scanned right on by yesterday. I'd have to pull the previous article but it seems to be an expansion of that.

1569 views

I'm looking forward to seeing what he says about Cat 2 now after time has past and we have several nice new production revolvers.

1571 views

Jest,yes and no.

Considering the number of new .44 specials and those coming and going in the last 30 years or so, one would think that loading manual publishers would have a section for specific new revolvers. Heck, Speer has such data for .45-70, .45 Colt, .257 Roberts, etc. It's time for SAAMI to step up, and not make us rely solely on magazines and the internet, which offer wildly differing data. It ain't 1908, and the .44 special needs to come of age.

I shall check out the new Handloader issue. My revolver likes 2400 and a Keith SWC, to performance almost identical to Skeeter's load (which unfortunately gives me some leading).

1565 views

lol

1565 views

HA. That's where I am except this one .44 special.....I was lured in.

1538 views

I like the 45 Colt better than 44 Mag, but I do have an Andy Horvath 44 Special on an OM 357 frame that I do enjoy shooting.
[image]

1573 views

David Clements old model bisley spurred hammers on that Horvath gun you'd have close to my dream 44 Special!

1531 views

Bmp

1488 views

RSS Feed of thread

powered by my little forum