;-) I am pretty sure the Duke had a brass bead, the Rifleman
by Rob Leahy 
, Prescott, Arizona, Friday, October 14, 2016, 08:28 (2965 days ago) @ Drago
didn't use know sights... (One of my favorite shows as a kid, my first cowboy hat was just like Mark's) These are just round steel front and a poor interpretation of semi buck horns shiny blue steel they don't present a good sight picture for me...years ago a friend had the same carbine, a trapper , in 44 mag... I had an 8 3/8s 629 with white outline and red ramp fronts... (No my favorite set up) We were both surprised that 100 pace and beyond shots were easier with the S&W. Superior irons and half the barrel length...
--
Of the Troops & For the Troops
Complete thread:
- 94 Trapper in 30-30 nice little gun lousy sights... Need -
Rob Leahy,
2016-10-12, 19:11
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- My default choice would be the Williams FP, then a STEEL -
Hobie,
2016-10-12, 19:14
- I put a Williams receiver sight on mine too - stonewalrus, 2016-10-12, 21:04
- I put a Williams FP on mine and am happy with it - JD, 2016-10-13, 14:40
- Sort of agree with Hobie. - Jimmy P., 2016-10-12, 20:06
- Might try Skinner. - Wildcat, 2016-10-13, 09:27
- 94 Trapper in 30-30 nice little gun lousy sights... Need - Drago, 2016-10-13, 09:44
- Hey Rob, "lousy sights"? -
Drago,
2016-10-13, 11:56
- ;-) I am pretty sure the Duke had a brass bead, the Rifleman -
Rob Leahy,
2016-10-14, 08:28
- HEY ROB! McCAIN DID USE HIS SIGHTS... - Drago, 2016-10-14, 16:08
- ;-) I am pretty sure the Duke had a brass bead, the Rifleman -
Rob Leahy,
2016-10-14, 08:28
- 94 Trapper in 30-30 nice little gun lousy sights... Need -
Sarge,
2016-10-13, 20:32
- Thanks all! Good answers. I neglected to mention this wasn't -
Rob Leahy,
2016-10-14, 08:40
- Thanks all! Good answers. I neglected to mention this wasn't -
Jared,
2016-10-14, 09:33
- Remove the white line and blacken the sight for a good post. -
Hobie,
2016-10-14, 18:31
- Remove the white line and blacken the sight for a good post. -
Jared,
2016-10-14, 23:58
- Ok, so cutting the face of the sight might not be a cost -
Hobie,
2016-10-16, 21:53
- Ok, so cutting the face of the sight might not be a cost -
Jared,
2016-10-17, 08:26
- A trick courtesy of Tony Boggus. -
Hoot,
2016-10-17, 11:43
- A trick courtesy of Tony Boggus. -
Jared,
2016-10-17, 23:22
- A trick courtesy of Tony Boggus. -
Sarge,
2016-10-18, 16:04
- A trick courtesy of Tony Boggus. -
Jared,
2016-10-19, 08:18
- Gotcha... -
Sarge,
2016-10-19, 12:29
- Swiss Grobet #0 serrating file, 30 LPI works for me. -
John K.,
2016-10-19, 13:36
- Pic -
John K.,
2016-10-19, 14:31
- Thanks John - Sarge, 2016-10-19, 18:07
- Pic - Jared, 2016-10-19, 22:19
- Pic -
John K.,
2016-10-19, 14:31
- Swiss Grobet #0 serrating file, 30 LPI works for me. -
John K.,
2016-10-19, 13:36
- Gotcha... -
Sarge,
2016-10-19, 12:29
- A trick courtesy of Tony Boggus. -
Jared,
2016-10-19, 08:18
- A trick courtesy of Tony Boggus. -
Sarge,
2016-10-18, 16:04
- A trick courtesy of Tony Boggus. -
Jared,
2016-10-17, 23:22
- I've been making do with what I've got all my life, so it -
Hobie,
2016-10-18, 20:01
- I've been making do with what I've got all my life, so it - Jared, 2016-10-19, 08:20
- A trick courtesy of Tony Boggus. -
Hoot,
2016-10-17, 11:43
- Ok, so cutting the face of the sight might not be a cost -
Jared,
2016-10-17, 08:26
- Ok, so cutting the face of the sight might not be a cost -
Hobie,
2016-10-16, 21:53
- Remove the white line and blacken the sight for a good post. -
Jared,
2016-10-14, 23:58
- Remove the white line and blacken the sight for a good post. -
Hobie,
2016-10-14, 18:31
- Rob, I have a Skinner on my .45 Colt '94 AE. - Hoot, 2016-10-14, 09:50
- Thanks all! Good answers. I neglected to mention this wasn't -
Jared,
2016-10-14, 09:33
- Thanks all! Good answers. I neglected to mention this wasn't -
Rob Leahy,
2016-10-14, 08:40
- 94 Trapper in 30-30 nice little gun lousy sights... Need - Creeker, 2016-10-15, 09:32
- Check whether XS is still making their "cowboy" sights - B C, 2016-10-15, 16:05
- My default choice would be the Williams FP, then a STEEL -
Hobie,
2016-10-12, 19:14