Removing rust from a nickel-plated Model 10?
by Scribe 
, Sunday, July 10, 2016, 15:39 (3046 days ago)
Hi,
I am eyeing a nickel-plated Model 10 -- pre-lock, pre MIM, etc. The barrel, inside and out, is free of rust as is the grip frame, cylinder and cylinder slot. And it is mechanically sound.
HOWEVER, there is some "freckling" or splotches, on the left-hand slide plate and the opposite side of the revolver below the cylinder. No pitting, just rust. There is also rust on the hammer and trigger.
My question is, what means are there to safely remove the rust without causing peeling or flaking of the nickel finish? There is a local gun shop that offers ultrasonic cleaning -- would that be OK and not harm the finish? Or can I do it myself?
Scribe
Flitz.
by Andrew , Bloomington, IN, Sunday, July 10, 2016, 15:47 (3046 days ago) @ Scribe
I've used it on a few nickeled Smiffs.
I,second Flitz.....
I bought a nickel model19 years ago that was dull and frosted. I got it for a good price. Took it home and used Flitz on it. Brought it back to the dealer and he was impressed. Asked what I used. He borrowed mine tube to do some work and hasn't been without since and bought me a nice big tube for the help.
I do have some Flitz handy
by Scribe , Monday, July 11, 2016, 07:41 (3045 days ago) @ woody
Will give it a try when I get my hands on it (need a permit, after all, I do live in New Jersey).
Thanks,
Scribe
Removing rust from a nickel-plated Model 10?
by Sarge 
, Central Misery, Monday, July 11, 2016, 21:24 (3045 days ago) @ Scribe
I have had great luck on nickel using Iosso gun-brite (?) metal polish in the camo tube. Worked fine on my old hard-used 29-2, a nickel RIA 1911 and a Colt Lawman or two that's been through here. Also perfect for polishing feed ramps, etc. after you bring them to a 600 finish.