Here is a picture of the fired primers...
by Cherokee 
, Medina, Ohio, Wednesday, April 20, 2016, 22:00 (3148 days ago) @ Paul
Those cases go to the scrap dealer. I would have the rifle bolt face checked as the gases may well have cut into the bolt face; there may also already be something wrong with it. Headspace was mentioned and that should also be checked; try gradually sizing a case to find the point at which the bolt will close on the sized case, then measure the neck and compare to the cases you have already sized. Just some thoughts...
Complete thread:
- Fired primer damage question...... -
John Meeker,
2016-04-19, 19:41
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Fired primer damage question...... -
uncowboy,
2016-04-19, 20:18
- Will see if I can get that negotiated over to here....will - John Meeker, 2016-04-19, 20:41
- Can't get photo lifted out of mail.....send... - John Meeker, 2016-04-20, 08:47
- More brain dump than experience but... - Hoot, 2016-04-20, 06:19
- Fired primer damage question...... -
Brian A,
2016-04-20, 10:26
- Fired primer damage question...... -
Steve K,
2016-04-20, 12:45
- Fired primer damage question...... -
Paul,
2016-04-20, 15:12
- Fired primer damage question...... -
steve k,
2016-04-20, 15:47
- Common problem... - Paul, 2016-04-20, 17:00
- Fired primer damage question...... -
steve k,
2016-04-20, 15:47
- Fired primer damage question...... - Brian A, 2016-04-20, 22:29
- Fired primer damage question...... -
Paul,
2016-04-20, 15:12
- Fired primer damage question...... -
Steve K,
2016-04-20, 12:45
- Here is a picture of the fired primers... -
Paul,
2016-04-20, 16:54
- headspace issue? - Josh Maloley, 2016-04-20, 17:13
- Hmm.... - Hoot, 2016-04-20, 17:32
- Thanks, Paul.....Steve is one of the good guys....... - John Meeker, 2016-04-20, 21:04
- Here is a picture of the fired primers... - Cherokee, 2016-04-20, 22:00
- Fired primer damage question...... -
Catoosa,
2016-04-21, 11:54
- Fired primer damage question...... -
Steve k,
2016-04-21, 15:08
- Let us know what you find out, please. (nt) -
Paul,
2016-04-21, 20:21
- update so far. -
steve k,
2016-04-23, 09:54
- Send it along, I'll post it for you. (nt) - Paul, 2016-04-23, 10:01
- update so far. - Brian A, 2016-04-23, 17:05
- update so far. -
Catoosa,
2016-04-23, 22:59
- update so far. - steve k, 2016-04-24, 09:03
- update so far. -
steve k,
2016-04-23, 09:54
- Let us know what you find out, please. (nt) -
Paul,
2016-04-21, 20:21
- Fired primer damage question...... -
Steve k,
2016-04-21, 15:08
- Fired primer damage question...... -
uncowboy,
2016-04-19, 20:18