The Sixshooter Community Website

The Frontier Sixshooter Community Message Board

Back to the forum index

Linear

what would it be? Maybe it's a rifle...or a shotgun...or a revolver or pistol. Maybe it's a flintlock! What is it you would build or maybe it's already in the queue at the gunsmith. Maybe you are doing a custom project yourself. What's it going to be?

I would love to get in line for one of Alan Harton's 327 conversions on a Bearcat. We will see what's possible as the backlog is extensive. Here's a good review of it on Gunblast. I'm not sure whose gun that was but it's setup so nicely.
http://www.gunblast.com/Harton-327Bearcat.htm

I do have a NM stainless Bearcat that will most likely get sent to Clements for one of his conversions to 22 mag with a fluted cylinder and various small touches. Or maybe I will pick up a Shopkeeper model and have Clements do his magic on the little birdshead grip frame.

I'm also getting an OM 357 to have Clements do a .44 special conversion on. I miss the octagon case-colored .44 conversion he did for me years ago.

Sometime in the future I might have Jack Huntington do a stainless 50 Alaskan Marlin for me. He's got some nice touches like a dovetailed mag tube. I used to shear the small mag tube screws on the last 50 AK I had. I like the tapered octagons at 18-20" with Ashley sights and a full length mag tube.

I would love to have one of Mic McPherson's little slicked up .44 carbines.

What's on your list?

1327 views

No new projects to start this year. I just want to wrap up the last 3-4 that are out there now. One will be a tribute copy of JT's Skeeter gun in 44 Special by John Gallagher. Another is a USFA light weight conversion in 45 Colt by Hamilton with the #5 base pin latch and the last is Dustins contribution to the Quest with an octagon Damascus barreled 500 Linebaugh on a Bisley Vaquero.

1260 views

I haven't seen a damascus barreled Linebaugh yet. Pricey. What's your Quest?

1241 views

***

1194 views

individual.

--
Of the Troops & For the Troops

1183 views

Bryan, a couple of years before I sold you that batch of parts I decided I wanted to order a custom revolver from each of the top gunsmiths whose work I liked. I tried to let each person build something that they felt represents their style, tastes and skills or specialties. It is often interesting to hear their response when you as them what they would build if they could have free rein within the base gun I am supplying and my preferred caliber. Dustin's is the last one I am waiting on to get finished then that goal or quest will be complete. Granted I have strayed off path with a few custom USFA, S&W and TLA projects along the way but they were ancillary to the original goal.

1104 views

Do you have photos of them? I would love to see what you've gathered. That's an impressive list and has taken a lot of time and resources. Kudos to you.

1109 views

I have a question about your damascus barreled project. Thanks.

1106 views

Somewhere here is a 4-5/8" 44 barrel and an OMBH 357 bored out to 429. That would be a simple enough project ...

1134 views

.

--
Of the Troops & For the Troops

1227 views

...left-handed derringer chambered for Herters .401 Powermag.

1237 views

-

1209 views

...have one for my right hand. ;-)

1166 views

-

1231 views

First is would like to finally get a 500 Linebaugh with a set of BluMagnum custom grips, standard 5.5" barrel and barrel band front sight.
Then I'd like a Stainless Steel Marlin 1894 in 357 Magnum converted to 256 Win Mag with a 20" octagonal barrel and full length 10 round magazine tube.
And the last one is something I've been thinking over for a couple of decades, a 6" barrel K-frame S&W with a 7-shot cylinder in 270 REN - the 22 Hornet case blown out to straight walls and trimmed to 1.29" long. Not sure where this desire came from, but I think it would be about perfect for rabbit hunting if I mounted one of the reflex sights on it to make up for my ever slowing focusing in-ability.

1193 views

-

1179 views

I keep looking at the .270 REN and wondering on it. I can't figure out what it belongs in but that's just me.

The .256 is interesting for certain. I spotted a Marlin Lever-Matic in .256 at the last show. He wanted more than I was willing to pay. Of course, being currently on a buying hiatus, what I was willing to pay wasn't very much.

1213 views

Not accepting new projects until I get a few in the queue completed. Currently have about a century long list if I worked on nothing else, so it will probably be while. I will consider this year to be a huge success if I can at least clean up my shop to the point some actual work can be done in it.

1199 views

Figured it was only fair to share some of the projects in my queue since several other guys shared some of theirs;
1917 Enfield, has the ears cut off, receiver profiled, new stock fitted, barreled action polished and blued, need to finish bedding action in stock, drill action for scope mounts, finish stock, polish and blue floorplate and fit to stock.
6.5 Greek Mannlicher, got it with stock and barrel cut down and action stripped with some pieces missing, need to crown barrel, polish metal and blue it, re-shape and re-finish stock, fit the new parts.
S&W Mod 14, need to install bull barrel and do an action job then polish and re-blue.
Lee Enfield, got it as a basket case, have not decided what to do with it yet
Have a few pieces around that need various repairs and/or tuning.

Then there are the vehicle projects;
'51 Willy's M-38, need to get a broken tap out of the head so it can be re-assembled after being sandblasted and re-painted,
'66 Dodge W-500, clean out fuel tanks and coat, replace cab mounts in floors, replace seals all around, re-do brakes, re-paint,
'53 REO XM-282, Complete tear down and restoration of this one of a kind prototype,
'39 Ford 9N, Complete tear down and restoration,
'62 Dodge M-37, Complete tear down and restoration,
'85 Jeep Scrambler, Complete tear down and restoration,
'52 Willy's M-38A1, Cosmetic freshening of this rust-free, but slightly banged up ex-forest fire fighting rig,
Plus a half dozen other rigs sitting here waiting attention.

Then there are the building projects;
Build a sun room on the cottage,
Build a three season room on the house,
Wire, insulate and interior finish of 3000 sq. ft. garage/shop
Install two post auto lift in the garage/shop
Build a shed for garden/yard tools and outdoor power equipment,
Organize stuff stuck in every corner of every building and deciding what to sell, what to dispose of, what to donate to charity, and what to keep.

Then there are the machine tool projects;
Refurbish Atlas/Craftsman 12" metal lathe,
Refurbish Atlas/Craftsman 6" metal lathe,
Refurbish Boyar Shultz 6"x18" surface grinder,
Re-wire shop to re-organize and re-install welding machines and make room for new tools.

Well, that is the severely abbreviated short list.

1192 views

you had me laughing at that. That is one serious list, even abbreviated. Sounds like you need tools and shop space up to speed so you can do a lot of work. Interesting list of projects.

1196 views

That is indeed a severely abbreviated short list of only some of the most interesting projects. Plus, I live alone and am in the process of trying to get an environmental consulting business off the ground.

1185 views

.

1174 views

In progress (well, sort of):
Martini Cadet in .32 SWL, finish stock work, eventually refinish metal bits
Mauser sporter in 8x57, finish restocking

On deck:
P-14 Enfield, re-bore to .35-303

Out there a ways:
Odd .45-70 single shot, re-bore to .50-70
Lee Enfield No. 4 in .303 Brit, finish up as a 'faux' Lee-Speed
1898 Krag in .30US, restock as a sporter

Not completely decided:
M-1917 action, maybe re-barreled to 8x68S?
VZ-24 action, built to an undecided caliber, maybe .375 or .400 Whelen?
Several 3-screw, .357 Rugers destined to become something else
Siamese Mauser action, maybe to become a .50 Alaskan?

And probably a few others that slip the mind right now.

1268 views

I love the handling and looks of nice Krag sporters, very classy. Have always been fascinated with the Siamese Mauser conversions as well, some very interesting possibilities. Actually, they all sound like great fun.

1167 views

you didn't say anything about the Husky's? The Cadet is cool. It was neat to see so many at CSA.

Dig the .50-70.

.400 Whelen isn't on every corner. Neat project. Same for the Siamese .50 Alaskan. That's one super-sized action. Handled one in .50 years ago. Good stuff and eclectic.

1111 views

would be to get them shooting to their potential. That and buy more! ;-)

1166 views

My custom plan is to take the Ruger M77 270 wcf my parents gave me as a Christmas present in 1979, and have it re-barreled to either 8 twist 6mm-06 or 8 twist 270.
Nothing extravagant, just a simple true up of the receiver and such, and a quality barrel install.

The 270 has a very loose chamber, and since I have another 270 in a Kimber Classic Select, the old Ruger gets a new tube.

1188 views

I am doing a rim fire scout rifle. Savage MK II FV-SF threaded bbl Boyde pro varmint stock mag holder on stock Ching Sling Making a 12" Pica tiny rail for the Leupold M8 2X forward of the action. Smooth up the bolt and Trigger and a perfect trainer. Second I want to finish the 480 Ruger Frank Himshoot and I were working on when he passed ,It has been sitting long enough. J.Michael

1198 views

-

1134 views

I ordered a Bartlein 5r from these guys on Friday and had it on the porch the next Tuesday. Beats a 6 month wait from the manufacturers.

http://bugholes.com/

1162 views

Fast twist rifles in those calibers do sound interesting, have always wanted a fast twist 250 Savage on a short bolt or single shot action.

1173 views

Nothing ooo-ahh, just a personal desire. I had a Mauser Mk X 30-06 that I put in a Bell and Carlson varmint stock, I really liked everything about it but the whippy, very skinny barrel. It went in yesterday with its brand new shinny Bartlein 5r Rem Varmint profile barrel to be a 20 inch 30-06 that won't heat up quite so fast. It ought to be an outstanding Pigger for an old guy that doesn't scamper across the prairie very well anymore.

Also have a H&R single shot youth model 7mm-08 in another shop getting cut to 15 inches then with a Yankee Hill Suppressor Mount/flash hider permanently mounted for an overall of right at 17.5 inches. Fifty rounds, Leupold 4x Scope, suppressor,and rifle (taken down) will fit in a brief case. Purpose: easy to pack rifle to always have in the truck at the ranch without worrying about hiding the case to keep it from being stolen when I'm in the metroplex. Yeah right. The real purpose: Just something I wanted to mess with. I had to go with the Yankee Hill mount and cut to 15 inches due to the first guy not knowing what he was doing with the H&R and getting baffle strikes when it was originally cut to 16 1/8 inches, and I did not want to SBR it. That's pretty much it for me this year.

1211 views

I like the idea of a portable and quiet system fitting into a small bag or case.

1146 views

It will fit at 17.5 and Hodgdon lists data for a 15 inch 7mm-08 in its pistol section on the web site.

1143 views

I think I would take one of the Browning Belgium Bolt action Safari Rifles in 30-06 or 270 and have it redone in a 35 Whelen. Have no use for one but it would be awesome to have it done and play around with it.

1142 views

that I have barrels for already. One is a .416 Taylor on a commercial Mauser action, other is another AR, this one in .50 Beowulf.

1184 views

I have gotten away from the real heavy recoiling rifles after a shoulder injury several years ago, so the 416 would be a bit much for me, but the .50 Beowulf really does look interesting. After recent changes in MI deer hunting laws allowing straight wall cartridges with a maximum length of 1.8" to be used almost anywhere in the state, an AR in that, or something similar, would be more interesting to me than a 5.56.

1143 views

and I've never owned one even though I have a bunch of 416 bullets. I would like to have a #1 in 416 Rigby and/or a really reliable 416 Remington bolt gun.

1161 views

But what's the fun in that?

1154 views

We figured out it wasn't sighted in but, hell, you could have shot it. Next time for sure.

1141 views

would love to get to know you better next time. If you ever get to Ft Worth let me know.

1132 views

We head home every year saying, "I should have spent more time with [fill in the blank]." Just keep showing up and you'll eventually get to talk to everyone. That's my theory anyway.

It's also quite correct to make requests when approaching the next CSA. I have found that folks are more than happy to bring along things for others to examine and shoot.

And, yes, we need to come to Texas. I have read and heard so much that I need to see it first hand. The only time I ever spent there was about 3 hours in the Dallas airport...not a fair representation at all.

1109 views

-

1073 views

You are welcome at our place.

1128 views

We would also extend the same invitation to you. Should your travels bring you to St. Paul/Minneapolis, please be sure to let us know. We'll be here for a while. After that, you'd be welcome to wherever we land!

1090 views

You can either spend time walking around and talking to friends,
or you can look for the new guns that you haven't seen before,
or you can walk around taking pictures,
or you can shoot.

There isn't time to do all of it.

1096 views

357 blackhawk conversion to 44 special
Auxiliary cylinder in 44 Russian
Powers custom steel colt style grip frame
Barrel length TBD
Stabilized cherry burl stocks
CCG custom bisley style hammer with CCG OM trigger
Steel erh
Gold bar insert front sight..Bowen rear
Polished blue. Wanted case colors but alas, budget depleted

1156 views

that would get you the CCs and you could add the cylinder later...next year, whatever. Nice project. I'm working up my sheet for CCG now for a .44 conversion.

1125 views

1. A Ruger conversion to .475 Linebaugh would be at the top of the list.
2. I shot an AR10 in .308 at CSA and it was lots of fun. That would be an interesting project.
3. A poor man's big bore pistol would be to buy the new Ruger Bisley in .480. I would prefer a 5.5" barrel instead of 6.5" so start with this gun and make it a custom- shorten the barrel, lap out the constriction at the threads in the frame, install a new patridge front sight, then some custom grips- maybe dark wood or black micarta.
4. I've become interested in .460 Rowland. I'm not sure what the best platform for that would be.

As for projects that are more within my reach-
1. The rules in highpower rifle competition are changing, I could build a new upper for that.
2. I have a Contender barrel that deserves a new scope and mount.

1147 views

I've got a couple that I know I'll get to this year and several that I'm hoping for. The oilfield crash is taking a toll on custom work but...

1. My Ruger Gunsight Scout rifle is going to be cerakoted here shortly.
2. I have a brand new Acusport Bisley that I have wanted to send off for several years now to be converted to .500 Linebaugh, in lieu of that I plan to trade off a S&W Custom shop engraved M29 for a Ruger Bisley in .480 Ruger.
3. I have been waffling back and forth about a small game carbine barrel for my Contender G2. .357 Mag to .25-20 and I think I've finally settled on a .32 H&R Mag.
4. And last but not least I am going to send off the cylinder for my .45 Colt Mountain Gun to TK Customs and have them cut it for .45 ACP moon clips.

If I get all that done and get my new TD recurve put together this year I will be a happy man.

Dean

1165 views

-

1100 views

Dave Clements. I'm really thinking the .480 Ruger Bisley would do everything I wanted the .500 for except be a half inch caliber.

1114 views

the 480 is great. The only real reason to go bigger is because you want to. I have both but I've always liked the 50's.

Clements does great work. I have some things headed his way. If I did a Max conversion then I would send it to Huntington. Only he and Linebaugh are still doing them...well, Reeder is but I prefer the work of the others. I haven't checked with Forkin or Harton but Clements and Bowen are out of the Max conversion biz.

1064 views

I don't know if he would still do them or not. Donor guns for Max conversions are pricy and hard to find, and there is a philosophical question of whether you should sacrifice a highly collectible gun for the conversion. I can't find why you would need more than the standard Linebaughs except for just because.

1116 views

Max conversions are just because you want to. I wouldn't use a Seville although some have.

I do like the idea of running at lower pressures in hot weather...and you can always play with a hotter load if you're feeling spicy. I enjoyed shooting them at CSA.

1078 views

it's looking like it will be a good pistol and has 90% of the capabilities of the custom Linebaugh. I would take a close look at them.

1123 views

RSS Feed of thread

powered by my little forum