Did the 2001-era Heritage N-frames incorporate all the earlier endurance package refinements?
Seems like a no brainer, but I've been surprised before.
Yes, the N-frames have the 'endurance package'
by FOG, Sunday, July 28, 2013, 00:09 (4141 days ago) @ brionic
Generally speaking, the best external indicator of its presence is the longer notches machined in the cylinder. By 2001, the package was 'standard equipment' in all models built on the N-frame, including the Heritage Series.
EXAMPLE: Smith & Wesson S&W Heritage PC 25-12 Lew Horton 45 @ GunBroker
Of course, exceptions exist. I saw a Model 24-3 with a 'long-notch' cylinder and a probable factory refinish at a gun show several years ago, so you never know what you'll find out there.
HTH
--
The M24-3 cylinder was recalled, within a specific serial
by brionic , Sunday, July 28, 2013, 08:08 (4141 days ago) @ FOG
number range, due to bad heat treating.
Factory sponsored inspections resulted in either stamped boxes for "passed" guns or replaced cylinders on "bad" guns, which is what you undoubtedly saw.
Exhaustion of new replacement cylinders and other parts has altered the factory repair paradigm. Look before you leap.
The M24-3 cylinder was recalled, within a specific serial
by SteveA, Sunday, July 28, 2013, 10:07 (4141 days ago) @ brionic
I might be wrong, but if I recall correctly, the recall was only for the stainless 624 and did not involve the 24-3.
Think you might be right Steve...
by pokynojoe, Sunday, July 28, 2013, 13:21 (4140 days ago) @ SteveA
I had a 4" 624 that I had to send back. Apparently mine wasn't one of those with the problem. I think they stamped a "C" on the box or some such thing, can't really remember, but yea, I had to send it in.
Joe
Right, I'm confused (again)
by brionic , Sunday, July 28, 2013, 17:37 (4140 days ago) @ SteveA
Thx for clarifying.
I have a couple of those, great sixguns. (nm)
by Boge Quinn, Sunday, July 28, 2013, 16:18 (4140 days ago) @ brionic
'
Thx. I bought it.
by brionic , Sunday, July 28, 2013, 17:41 (4140 days ago) @ Boge Quinn
25-11, blued, NIB, and I got a Boge-style deal on it.
Should be a close match for something else, en route from David Carroll...
Well done! A Boge-style deal, according to Jeff means...
by Boge Quinn, Sunday, July 28, 2013, 18:06 (4140 days ago) @ brionic
...not necessarily paying too MUCH, just too SOON!
He has told me that before.
Ha! I did both, dumbfounded by my luck.
by brionic , Sunday, July 28, 2013, 18:40 (4140 days ago) @ Boge Quinn
Pictures soon.
Looking forward to it! I have...
by Boge Quinn, Monday, July 29, 2013, 14:48 (4139 days ago) @ brionic
...one of these:
http://www.gunblast.com/Cumpston_Mod24Heritage.htm
...and this:
http://www.gunblast.com/SW-21Classic.htm
Wonderful sixguns.
I remember when you bought your .44
by brionic , Monday, July 29, 2013, 16:03 (4139 days ago) @ Boge Quinn
I had been watching it, and then *POOF* it was gone as you clicked the Buy It Now button.
Lesson: Don't wait. Buy it Now. I did. Same price as yours, without the cch.
And a hint:
by brionic , Monday, July 29, 2013, 16:06 (4139 days ago) @ brionic
Beautiful! The bluing on those...
by Boge Quinn, Monday, July 29, 2013, 16:50 (4139 days ago) @ brionic
...ain't "JUST" bluing!
Pssssst...
by FOG, Monday, July 29, 2013, 18:04 (4139 days ago) @ brionic
'They usually show up in threes'
by FOG, Monday, July 29, 2013, 18:17 (4139 days ago) @ brionic
It seems Numero Dos sold today: S&W 1'st Mod Triple Lock Target .44 Special
Three is 'still out there'.
--
That's a dandy.
by Hoot , Diversityville, Liberal-sota, Wednesday, July 31, 2013, 14:47 (4137 days ago) @ brionic
Mine is like Boge's without the CCH. Now I'm gonna have to dig it out and shoot it some.
Probably no need to worry about the cyl throats on that one
by FOG, Monday, July 29, 2013, 18:27 (4139 days ago) @ brionic
But from the Just-In-Case Category, it should probably also be noted that the presence of the 'endurance package' on the S&W Model 25-11 does not make it a Ruger.
You could probably run cast 250s @ ~950 through the gun all the live-long-day, but that's about as far as I'd take it.
JMO, YMMV, HTH, etc.
--