The Frontier Sixshooter Community Message Board - You are correct, 25-2

You are correct, 25-2 (reply)

bmize — Thu, 17 Sep 2015 15:20:20 +0000

Fingers and brain did not connect

make tube long enough to hold six empties, small flatnose (reply)

ersisk — Wed, 16 Sep 2015 06:10:44 +0000

pliers will snap tight cases in without bending, one jaw against outer case rim other jaw against inside edge of moon clip. keep all forces in the same plane as the moon clip to avoid bending.

Ahhh yeah!!! 25-5 = .45 Colt! (reply)

Andrew — Wed, 16 Sep 2015 00:24:00 +0000

Methinks he meant 25-2 though.

Moon clip tools.....S*W M25-5 DO NOT NEED THEM !! (reply)

WIL TERRY — Wed, 16 Sep 2015 00:06:04 +0000

NOPE !!

SHARPIE! (reply)

Andrew — Tue, 15 Sep 2015 23:28:45 +0000

I just use the bottom end of a standard Sharpie marker inserted into the case. Gives you enough leverage to pull it right out.

an Empty case works great... place case over bullet gives le (reply)

Rob Leahy — Tue, 15 Sep 2015 20:56:08 +0000

leverage...A screw driver works too. If the chambers are not too long, just shoot ACPs sans clip use a pencil to extract. or thumbnail

Moon clip tools..... (reply)

Remington40x — Tue, 15 Sep 2015 20:25:29 +0000

It's helpful to buy a small T joint and glue it to the end of the PVC pipe for more leverage. I know this from first-hand experience.

Moon clip tools..... (reply)

bmize — Tue, 15 Sep 2015 20:01:44 +0000

I knew I had seen some simple tool before, just couldn't remember it.
Thank you sir.

Moon clip tools..... (reply)

uncowboy — Tue, 15 Sep 2015 18:08:02 +0000

PVC or metal tube close to the shell diameter so it slips over the shell. Cut 1/2 the tube 1/8" down and make a step slide over the case the large part of the step will touch the moon clip and with a twist the shell will pop out. Hope I explained it well. J.michael

Moon clip tools.....

bmize — Tue, 15 Sep 2015 17:42:01 +0000

I have been loaned a 25-5 to play with. Came with 6 half moon clips. They are so tight I feel like I am bending them getting the cases back out. What cheap/home made tools do you guys like? I really dont want to invest in a setup like Dillon sells.

Thanks