The Frontier Sixshooter Community Message Board - That's a 45 Extra LONG Colt, BTW ;)

That's a 45 Extra LONG Colt, BTW ;) (reply)

Sarge — Wed, 01 Jan 2014 01:06:57 +0000

Cool! Do this count? (reply)

Sarge — Tue, 31 Dec 2013 18:15:19 +0000

The post that the cylinder release pushes forward (reply)

Andrew — Tue, 31 Dec 2013 01:29:19 +0000

is threaded, and can work it's way down too far to release the cylinder. It is slotted and can be adjusted back out to the correct depth.

I had a 22 lr Pathfinder that had problems with the ejector (reply)

AkRay — Tue, 31 Dec 2013 00:51:02 +0000

button. I would open it by pulling the ejector rod forwards and it worked fine. The 44 Bulldog still works fine by the same method. I agree with Rob. Your hammer needs some more removing and sculpting.

Shall we resurrect the Belly Gun madness? (reply)

Lee J. — Mon, 30 Dec 2013 04:25:02 +0000

Whoever would use sights on a belly gun anyhoo ???

Same lebngth as the Mag-na-Port Backpacker... (reply)

Rob Leahy — Mon, 30 Dec 2013 03:22:18 +0000

i would think so. (reply)

cable — Mon, 30 Dec 2013 03:08:14 +0000

Well... The current guns and the "Pugs" are 2.5"..... (reply)

Andrew — Mon, 30 Dec 2013 03:05:28 +0000

I fired it for function. Anything inside of 25 feet is in a bad way from a 240 grain bullet going sideways or not. This is the always/anywhere gun. The Glock 19 travels as backup often.

I'd call the ejector rod "steampunk", but that is gay too. (reply)

Andrew — Mon, 30 Dec 2013 03:01:32 +0000

i always heard that the 3" barrel was needed to stabilize (reply)

cable — Mon, 30 Dec 2013 03:01:23 +0000

the bullet. only ones i have had were 3" so really cant say , but some articles claimed so.
the 3" worked..have you tried it yet?

I Like like bellyguns...I think the Belly gun game was gay. (reply)

Rob Leahy — Mon, 30 Dec 2013 02:44:25 +0000

Still do.
I'd take the spur off completely. Nice jub on the ejector rod.

Shall we resurrect the Belly Gun madness?

Andrew — Mon, 30 Dec 2013 00:22:25 +0000

I picked up a beater Charter Arms Bulldog .44 yesterday, and decided it was much to bulky. It had giant Pachmayer grips, and that 3 inch barrel was a drag. The cylinder release was missing a part and not functioning well, so I took it off (Ray, you may remember the one I sold you having the same issue). Fortunately, Charter Arms cylinders can be opened by just pulling forward on the ejector rod, which now wears a brass threaded woodwork insert. The original was missing. While the Dremel was spinning, I went ahead and zipped 1/4" off the hammer spur. No front sight is not much of a problem, the trough in the frame makes a really good sight line on it's own.