The Frontier Sixshooter Community Message Board - Ram on Left

Ram on Left (reply)

Charles — Fri, 06 Sep 2013 15:50:50 +0000

is for an old Pacific C or Super C press. It is dedicated for one specific cartridge case and will be stamped on top either with a caliber or a number. Let me know what it is as I might have a use for it.

Following John's lead... (reply)

Hoot — Fri, 06 Sep 2013 15:21:28 +0000

Some usage instructions turn up in post #3 here => http://castboolits.gunloads.com/showthread.php?52904-Winchester-1894-Tool

A bunch of other pictures and whatnot also turned up.

If those Newton dies need a new home, please be sure to let me know.

Thanks!

anybody recognize any of this old stuff? (reply)

Slow Hand — Fri, 06 Sep 2013 11:38:38 +0000

Far left looks like the ram to a press; no help on what kind though

The three threaded shell holders look familiar, I remember NOT buying a press years ago because it used that kind.

The two spring loaded deals to the right of the three shell holders look like part of a press mounted priming tool. Do the ram sizes look right for small and large primers?

Search for Winchester 1894 tool and you will find info. (reply)

John K. — Fri, 06 Sep 2013 04:14:58 +0000

Personally don't know much about them.

anybody recognize any of this old stuff?

bj2 — Fri, 06 Sep 2013 03:13:03 +0000

I think this stuff came from my uncle's estate. I don't recognize any of it except for the couple of .30 Newton dies on the right.

The 2 large black pieces in the middle are stamped Winchester. There are 3 pieces underneath that are threaded and cone-shaped- these look like shellholders. There are a couple of pieces to the left that look like they might be bullet sizing dies.