The Frontier Sixshooter Community Message Board - I've owned a few 'tactical' knives, but I never carry them

I've owned a few 'tactical' knives, but I never carry them (reply)

FOG — Thu, 21 Mar 2013 20:56:50 +0000

I just like to look at them and maybe slice a piece of paper or two.

For real-world, everyday use, the 'grayer' the better, if you ask me.

I've even largely given up carrying my Spyderco Clipits, just because of the clip: The wrong people draw the wrong inferences from seeing one, and nowadays I don't like to advertise that I carry a pocket knife.

Too many sheep, not enough wolves...

My wife once said it was barbaric... (reply)

rob — Wed, 20 Mar 2013 02:29:12 +0000

To pull out a pocket knife in a restaurant (or our kitchen) and cut steaks, jalapeños or whatever. After almost 26 years I've just about got her trained...she'll never be a redneck but she's certainly the best redneck's wife I could have ever hoped for:) It's not tactical but I tend to carry a Case Stockman I bought back when in my teen years. Razor sharp, still tight as new.

Looking at the new ones, I have to agree (reply)

FOG — Tue, 19 Mar 2013 09:54:28 +0000

I didn't see anything in the current Spyderco lineup that I couldn't live without.

Which is a relief.

The 'Snake Knife' (not a Spyderco) (reply)

FOG — Tue, 19 Mar 2013 05:22:47 +0000

Once a month or so, I go out and have a steak, usually a filet.

Food prices being what they are nowadays, I like to get my money's worth on dinner, so a few years ago I 'invested' some of it in one of these...

(Actually, I just 'needed' an excuse to buy another knife. )

Kershaw Shun Higo Nokami ("Personal Steak Knife")

I got mine the first time they quit making them, so it was discounted well below retail. (I used to do the same thing with Spydercos, but I haven't since around the time of the Persian.)

On performance, I think it makes a big difference with a really good steak, virtually none if the steak is even a little bit tough.

For that kind, the hacksaw they normally issue in restaurants these days works just fine.

(Photo Edit)

It does carry very easily (reply)

FOG — Tue, 19 Mar 2013 04:46:28 +0000

It's also still crazy sharp!

I also much prefer the riveted construction of these old-style Spydercos to the screwed-and-glued knives so common today.

I gather the owner can tighten-up the latter type at will, but the former seemingly never need it if you just take care of them.

Thanks − I got my first Spyderco in the early '90s (reply)

FOG — Tue, 19 Mar 2013 04:33:55 +0000

It was a serrated-edge CoPilot (C09S), just like this one:

I reckoned the short blade would be OK for work, and it pretty much was.

Once or twice some lemming raised their eyebrows over that wicked, 'jagged' edge, but they were usually persuaded to 'put it in their pipe and smoke it' without too much trouble.

I liked the knife so much, I got another one for 'play', so I had two of them for many years. Then, a few years ago, the work knife turned up spare, so I gave it to a friend.

I had also found this one on Blade Forums, the plain-edge variation of the CoPilot (C09P), and I really didn't 'need' three of them.

It was NIB, but still just $45, and that was cheap even then (about five or six years ago).

I normally carry the Kiwi nowadays, but all my Spydercos remain on-duty; in folders, it's my favorite brand.

(SPG Edit)

FOG you have some nice older spyderco knives. (reply)

woody — Tue, 19 Mar 2013 00:26:08 +0000

I like and collect older Spyderco knives. They don't make many models now that I like. Plus not all of them are made in the US. My first hunting knife was a buck 110. Got it in mid 80's and still have it. I don't use it much but do take it out once or twice a year to gut a deer for old times. But I prefer a fixed blade for field work and now a dozier my wife bought me is my constant companion.

That's one of my favorites for everyday carry (reply)

Brian — Mon, 18 Mar 2013 20:57:17 +0000

The curve is just right for the way I carry it. Also, the spine is nicely squared, which helps throw sparks off the ferro rod when I'm camping with the boys.

Winner!

useful shop blade form, for me (reply)

John Meeker — Mon, 18 Mar 2013 13:09:16 +0000

have a few of that shape for the bench. currently carrying a discontinued Cammilus USA thumbhole blade.

That Buck Vantage looks great (reply)

FOG — Sun, 17 Mar 2013 23:08:32 +0000

But I was mainly just musing.

I normally carry a Spyderco Kiwi (C75P) − in my watch pocket.

Dave, look into the (reply)

Glen — Sun, 17 Mar 2013 22:44:44 +0000

...Buck Vantage, made with S30V steel (they also made this model with lesser grades of steel). It's the best made EDC knife I've found yet. I've been carrying this one daily for a little over 2 years.

The 'Spydiebuck'

FOG — Sun, 17 Mar 2013 22:12:43 +0000

I 'grew up' during the Buck Knife Craze of the 1970s, which, in addition to my reading MAD magazine, no doubt explains everything.

Since then, I always thought to get another Buck, but the truth is, we now have better alternatives.

For example, this one:

SPYDERCO PERSIAN BLACK MICARTA ~ C83BM (DISCONTINUED)

I was actually recently thinking of selling it, but I believe I'll hang onto it a while longer.