357 heavy

by Tom Richardson @, Clarksville, Arkansas, Friday, August 10, 2012, 14:46 (4299 days ago)

I have several 185 gr Bear Tooth Bullets. They are 185gr FNGC and I want to load them heavy for my Rossie 92 .357.

I have not been able to find load data for this weight gas checked bullet.

I guess that is what i need. Load Data that won't take my head off.

I trust you all. ??;-)

357 heavy

by Jared, Friday, August 10, 2012, 15:45 (4299 days ago) @ Tom Richardson

I can't tell you load data off the top of my head, I am on the road. But I have had great results with Lil'Gun in my .357 rifles. You should be able to get around 1700 FPS give or take.

357 heavy

by anachronism, Friday, August 10, 2012, 19:40 (4299 days ago) @ Tom Richardson

I've always used jacketed bullet data for gas-checked bullets to start out, and made any adjustments as needed.

Winchester 92 is a strong action

by bj @, Friday, August 10, 2012, 20:22 (4299 days ago) @ Tom Richardson

That should give you some peace of mind.

In the old days Sierra made a 170 FMJ and Hornady made a 180 FMJ, both for the IHMSA silhouette shooters, so load data should be available for them. My understanding has always been that lead bullets have less pressure than jacketed.

I think your biggest challenge is experimenting to find the proper cartridge length to function in that action and still not take away too much of your powder space.

357 heavy

by woody, Friday, August 10, 2012, 21:14 (4299 days ago) @ Tom Richardson

I use 12.9 grs. of 296 with Cast Performance 180 gr GC WFN.

357 heavy

by Tom Richardson @, Clarksville, Arkansas, Friday, August 10, 2012, 21:27 (4299 days ago) @ woody

Thanks all.

Woody,
I have lots of 296 and 2400.
Looks like these are the powders I will be playing with.

357 heavy

by RidinLou, Middle TN, Friday, August 10, 2012, 22:35 (4299 days ago) @ Tom Richardson

I'm not recommending loading data, but with my heavy 180 gain GC cast I use 14.2 grains of 296 in my GP100.

Lands where I point it at 50 yards and arrives with authority.

357 heavy

by brionic @, Saturday, August 11, 2012, 12:18 (4299 days ago) @ Tom Richardson

Tom, I have used 2400 with that bullet. I start around 12gr and stop around 13.5gr or so, depending on lot density. Using the Lee Pro Auto Disk volumetric loading I start over every time, using the .88, .95, and 1.02 CC settings. Mid level loadings are fine, as with the hotter loads I have managed to bust the bolts off my targets a few times.

357 heavy

by Tom Richardson @, Clarksville, Arkansas, Saturday, August 11, 2012, 15:10 (4298 days ago) @ brionic

Thanks for the information Brian.
We are continuing to pray for your son and your family.

357 heavy

by Slow Hand ⌂ @, Indiana, Saturday, August 11, 2012, 15:42 (4298 days ago) @ Tom Richardson

Tom, I used to load a WFN style of 180 gr gas check and now use my own heavy cast swc-gc that run around 190. I forget the load right now and about 140 miles from my loading notes, but I know it's a full grain under max from the Hornady loading manual/magazine with Lil Gun. I get very good velocity and accuracy. Killed my first two deer with a soft nosed version of that bullet. I'm loadin for a Rossi '92 as well. Lil Gun seems to give higher velocity and lower pressure than most comparable powders.

RSS Feed of thread

powered by my little forum